Connect Brilliant Smart to Daikin Online Controller and unlock powerful automations

This trigger fires when the specified device/group is turned on.

This Trigger fires within 15 minutes of detection of the indoor temperature rising above the specified temperature threshold.

This trigger fires when user unlocking the lock, his password or fingerprint identification or card is confirmed.

This Trigger fires within 15 minutes of detection of the indoor temperature dropping below the specified temperature threshold.

This trigger fires when the specified device/group is turned off.

This Trigger fires within 15 minutes of a detection of any unit notification from one of your registered devices.

This trigger fires when the specified camera detects motion. To use this trigger, camera’s motion detection should be turned on.

This Trigger fires within 15 minutes of your unit having been turned on.

This trigger fires when the specified camera detects sound. To use this trigger, camera’s sound detection should be turned on.

This Trigger fires within 15 minutes of your unit having been turned off.

This trigger fires when someone input incorrect password repetitiously.

This trigger fires when residual electricity in the lock under threshold.

This trigger fires when the door sensor is open.

This trigger fires when the door sensor is closed.

This trigger fires when PIR detects person.

This trigger fires when water leak detected.

This trigger fires when water sound and light detected.

This query returns a list of when the specified device/group was turned on.

This query returns a list of detections of indoor temperature dropping below the specified threshold. Note: this query will only return future events after this Applet is created.

This query returns a list of when the door sensor was closed.

This query returns a list of events when your unit was turned off.

This query returns a list of when user unlocked the lock, his password or fingerprint identification or card was confirmed.

This query returns a list of times, within 15 minutes of detection, of when the indoor temperature rises above the specified temperature threshold. Note: this query will only return future events after this Applet is created.

This query returns a list of when PIR detects person.

This query returns a list of events when one of your registered devices detected a unit.

This query returns a list of when the specified camera detects sound.

This query returns a list of within 15 minutes of your unit having been turned on.

This query returns a list of when water leak detected.

This query returns a list of recent times the door sensor was open.

This action will turn on the device/group of your choosing.

This Action will turn on your Daikin AC unit, or change its settings. It will be executed within 1 minute.

This action will activate the specified scene.

This Action will turn off your Daikin AC unit. It will be executed within 1 minute.

This action will set your light to a specified brightness.

This Action will enable/disable Econo mode on your Daikin AC unit. It will be executed within 1 minute and will only work in combination with the new R32 outdoor (RXM or MXM) units. If your unit does not support this function, then it will not show up in the device dropdown list.

This action will turn off the device/group of your choosing.

This Action will enable/disable Holiday mode on all your Daikin AC units. It will be executed within 1 minute.

This action will set the light to specified color.

This action will set your AC to Heat Mode.

This action will set your AC to Cool Mode.

This action will set your AC to a specified temperature by remote controller.

This action will turn on the oscillation function of your fan by IR remote controller.

This action will turn off the oscillation function of your fan by IR remote controller.