Connect iDevices to UbiBot and unlock powerful automations

This trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.

This trigger fires when the specified product turns on.

This trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.

This trigger fires when the specified product turns off.

This trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.

This trigger fires when your thermostat target temperature is set above or below the specified value.

This trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.

This trigger fires when the target thermostat mode changes to the configured mode (or on any change if 'any' is selected).

This trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.

This trigger fires when the ambient temperature read on your device is above or below the configured value.

This trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.

This trigger fires when the specified product's night light turns on.

This trigger fires when your UbiBot device is offline.

This trigger fires when the specified product's night light turns off.

This trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.

This trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).

This trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)

This trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.

This trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.

This trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.

This trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.

This query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of when the specified product's night light turned off.

This query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of recent thermostat changes to the configured mode (or of all changes if 'any' was selected).

This query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.

This action will turn the specified product off.

Send Action Command to Turn On or Off your UbiBot Smart Plug

This action will turn the specified product on.

This action will set the percentage of brightness for the specified product.

This action will set the target temperature of your thermostat.

This action will set the mode of the selected thermostat.

This action will turn the specified product's night light on.

This action will turn the specified product's night light off.

Set the color of the specified product's night light.