Connect Air Monitor to WeMo Maker and unlock powerful automations

This trigger fires when the button on Air Monitor is pressed briefly.

This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.

This trigger fires when a new air quality is reading available.

This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.

This trigger fires when the temperature measured from your Air Monitor rises above your threshold setting.

This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.

This trigger fires when the temperature measured from your Air Monitor drops below your threshold setting.

This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This trigger fires when the humidity measured from your Air Monitor rises above your threshold setting.

This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This trigger fires when the humidity measured from your Air Monitor drops below your threshold setting.

This trigger fires when the air quality measured from your Air Monitor is good. (Indoor Air Quality value drops below 50 or your threshold setting)

This trigger fires when the air quality measured from your Air Monitor is unhealthy. (Indoor Air Quality value rises higher than 150 or your threshold setting)

This trigger fires when the air quality measured from your Air Monitor is very unhealthy. (Indoor Air Quality value rises higher than 200 or your threshold setting)

This query returns a list of when your WeMo Maker relay was turned on in momentary mode.

This query returns a list of when the humidity measured from your Air Monitor rises above your threshold setting. Note: this query will only return future events after this Applet is created.

This query returns a list of times a signal was not detected by an enabled sensor.

This query returns a list of when the temperature measured from your Air Monitor rose above your threshold setting. Note: this query will only return future events after this Applet is created.

This query returns a list of times a signal was detected by an enabled sensor.

This query returns a list of instances when the air quality measured from your Air Monitor was good. (Indoor Air Quality value drops below 50 or your threshold setting) Note: this query will only return future events after this Applet is created.

This query returns a list of when your WeMo Maker relay was turned off in toggle mode.

This query returns a list of when a new air quality is reading available.

This query returns a list of when your WeMo Maker relay was turned on in toggle mode.

This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.

This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.

This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.

This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.

This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.

This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.

This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.

This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.