Connect eWeLink Smart Home to iZone and unlock powerful automations

This Trigger fires every time your eWeLink Button is pressed.

This Trigger fires if the iZone system is turned off.

This trigger fires when your eWeLink Support 4-Channel Plug is turned on or off.

This trigger fires when an iLight is turned on.

This trigger fires when your eWeLink Support 3-Channel Plug is turned on or off.

This trigger fires when an iLight is turned off.

This trigger fires when your eWeLink 2-Channel Plug is turned on or off.

This trigger fires when one iLight switch battery low alarmed.

This trigger fires when your eWeLink Support 1-Channel Plug is turned on or off.

This trigger fires when your iDrate is turned on.

This trigger fires when your eWeLink Support 4-Channel Switch is turned on or off.

This Trigger fires if the A/C systems supply air temperature rises above a specified threshold.

This trigger fires when your eWeLink 3-Channel Switch is turned on or off.

This Trigger fires if the iZone systems supply air temperature falls below a specified threshold.

This trigger fires when your eWeLink Support 2-Channel Switch is turned on or off.

This trigger fires when your iDrate is turned off.

This trigger fires when your eWeLink Support 1-Channel Switch is turned on or off.

This Trigger fires when a zone's actual temperature rises above a specified threshold.

This trigger fires when your eWeLink Support Smart Dimmer is turned on or off.

This trigger fires when an iDrate controller detects a fault.

This trigger fires when the brightness of selected dimmer is above threshold.

This trigger fires when an iDrate Station detects a fault.

This trigger fires when the brightness of selected dimmer is below threshold.

This Trigger fires when a zone's actual temperature falls below a specified threshold.

This trigger fires when the state of selected door sensor is open or closed.

This Trigger fires when the AC unit temperature rises above a specified threshold.

This trigger fires when the temperature of selected device goes above or below threshold.

This Trigger fires when the AC unit temperature falls below a specified threshold.

This trigger fires when the humidity of selected device goes above or below threshold.

This Trigger fires if the iZone system is turned on.

This trigger fires when the voltage of selected device is above or below threshold.

This trigger fires when the electric current of the selected device goes above or below threshold.

This trigger fires when your light is turned on or off.

This trigger fires when your light brightness goes above or below.

This trigger fires when the fan or the light of your FanLight is turned on or off

This trigger fires when an alarm of your RF Bridge is activated.

This Trigger fires every time the camera detects a motion event.

This trigger fires when the water level of a diffuser is low.

This trigger fires when motion is detected or no motion is detected from Zigbee motion sensor.

This trigger fires when leak is detected from water leak sensor.

This trigger fires when the status of a Zigbee door sensor is open or closed.

This trigger fires when Zigbee Wireless Switch is pressed, double pressed, or long pressed.

This trigger fires when the selected electric curtain is open or closed.

This trigger fires when the child lock status changes (enabled/disabled).

This trigger fires when the thermostat mode changes.

This trigger fires when the thermostat turns on or off

This trigger fires when your light’s color temperature of light apperances warm or cool white.

This trigger fires when your lights to a specified colour .

This Trigger fires every time your eWeLink Scene Controller is pressed.

This query returns a list of if the iZone systems supply air temperature falls below a specified threshold. Note: this query will only return future events after this Applet is created.

This query returns the on/off state of the device you choose.

This query returns a list of when an iDrate Station detects a fault.

This query returns a list of when an iLight was turned on.

This query returns a list of if the iZone system was turned off.

This query returns a list of when your iDrate was turned on.

This query returns a list of when an iLight was turned off.

This query returns a list of when the iZone system was turned on.

This query returns a list of when the AC unit temperature rises above a specified threshold. Note: this query will only return future events after this Applet is created.

This action will turn all iLights on.

This action will turn your eWeLink Support 4-Channel Plug on or off.

This action will turn all iLights off.

This action will turn your eWeLink Support 3-Channel Plug on or off.

This action will turn the specified iLight on.

This action will turn your eWeLink 2-Channel Plug on or off.

This action will turn the specified iLight off.

This action will turn your eWeLink Support 1-Channel Plug on or off.

This Action will decrease the A/C setpoint by the selected number of degrees celcius.

This action will turn your eWeLink 4-Channel Switch on or off.

Change the brightness of an iLight.

This action will turn your eWeLink Support 3-Channel Switch on or off.

This Action will set the selected zone to selected mode

This action will turn your eWeLink Support 2-Channel Switch on or off.

This Action will set iSave for the selected iZone system. The iSave cools your whole home using your ducted reverse cycle air conditioner’s fan mode for only a few cents an hour.

This action will turn your eWeLink Support 1-Channel Switch on or off.

This Action will change the iZone A/C system's setpoint temperature.

This action will turn your eWeLink Support smart dimmer on or off.

This Action will increase the A/C setpoint temperature by selected number of degrees celcius.

This action will set brightness for selected eWeLink Support smart dimmer .

This Action will change the selected zone setpoint temperature.

This action will set a color for selected light.

This Action will increase the selected zone setpoint temperature by the selected number of degrees celcius.

This action will set a color temperature for selected light.

This Action will decrease the selected zone setpoint temperature by the selected number of degrees celcius.

This action will set the brightness for selected light .

This action will change the colour of the iLight.

This action will turn your light on or off.

This action will change the special effect for the iLight.

This action will press selected remote button on your RF Bridge.

This Action will activate the selected iZone favourite.

This action will turn on or turn off the fan or the light of your fanlight.

This action will activate a specified favourite for your iLight.

This action will open or close your electric curtain.

This action will run the selected Program on the iDrate.

This action will turn your diffuser on or off.

This action will turn the iDrate system on.

This action will open selected curtain to the percentage you set.

This action will turn the iDrate system off.

This action will enable or disable the child lock.

This action will changes the iDrate weather mode to fine.

This action will change the thermostat mode (Manual/Program).

This action will run the selected iDrate station.

This action will turn your eWeLink Thermostat on or off.

This action will change the station run times by the selected percentage. This will increase or decrease the programmed station running time.

This action will set the light on/off or the fan speed of fanlight.

This Action will turn on the iZone system.

This Action will makes the camera sound an alarm.

This Action will change the iZone air condition system to the selected mode.

This Action will set the iZone A/C system to the selected fan speed.

This Action will turn off the iZone AC system.

This Action will set the A/C sleep timer to a predetermined period.