This Trigger fires every time your Manything camera detects motion while recording. NOTE: set your camera's sensitivity threshold in the Manything app.
This Triggers when a device detects that its power has been disconnected.
This Trigger fires when the power is reconnected to a device.
This Triggers when a device's battery is running low. It will trigger when there's around 20% charge remaining.
FLIR ONE temperature rises above threshold
The Trigger fires when the temperature on one or more pixels anywhere on the screen exceeds your temperature threshold. NOTE: this Trigger can only be used with optional FLIR ONE hardware.
This Action will start your Manything camera recording. NOTE: the Manything app must be open at the recording screen on the device you specify.
Use front facing camera
This Action will change the Manything settings so that video is captured using the front facing camera.
Use rear facing camera
This Action will change the Manything settings so that video is captured using the rear facing camera.
This Action will stop your Manything camera from recording further.
Turn camera flashlight on
This Action will turn the camera's flashlight on (if it has one).
Turn camera flashlight off
This Action will turn the camera's flashlight off.
This Action will mute audio for recordings made on a device, so no audio is captured.
This Action will turn off mute audio, so that sound is captured when the device is recording.
Change to 'Stills Mode'
This Action will switch your recording from a video stream to stills only mode, where still images are taken at regular intervals rather than video. Ideal for low bandwidth usage.
Change to 'Video Stream'
This Action will switch from ”Stills Only Mode” to a video stream. Note: your network bandwidth must be good enough to stream video, and the device may drop back to stills mode automatically if connection is poor.
Set time interval between stills
This Action will sets the time interval between stills images. This value is only used when the phone is recording in stills mode.
Set motion sensitivity threshold
This Action will set the motion sensitivity on a device. "1" triggers on small motion events. "10" triggers on big motion events.
Set multiple camera settings
This Action will set a number of different camera settings at the same time. You don't need to set all the settings, and can leave some as "please select", so they remain unchanged on the device. NOTE: To start a new recording, the app must be open at the recording screen on the device you specify.
Set Manything to FLIR thermal mode
This Action will switch your Manything camera from video to FLIR thermal mode. You can also use it to change the FLIR thermal mode of your FLIR ONE. NOTE: For use with optional FLIR ONE unit only.
Switch Manything from FLIR thermal mode to video mode
This Action will switch the camera from FLIR thermal mode back to normal Manything video mode. NOTE: For use with optional FLIR ONE hardware only.