Connect Aqara Home for RU to Yeelight and unlock powerful automations

This trigger fires when the specified single rocker switch is turned on/off.

This trigger fires when the specified Wireless Relay Controller is turned on/off.

This trigger fires when the specified light is turned on/off.

This trigger fires when the specified plug is turned on/off.

This trigger fires when water leak is detected.

This trigger fires when the tilt is detected.

This trigger fires when motion is detected.

This trigger fires when the cube was tapped twice.

This trigger fires when the cube is triggered after one-minute inactivity.

This trigger fires when the humidity reaches the specified value.

This trigger fires when the cube was rotated.

This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.

This trigger fires when the temperature reaches the specified value.

This trigger fires when fire is detected.

This trigger fires when fire is no detected.

This trigger fires when the water recedes.

This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the door and window sensor is open.

This trigger fires when the humidity drops to the specified value.

This trigger fires when the vibration is detected.

This trigger fires when the motion is detected and brightness is above the specified value.

This trigger fires when the cube was shaken.

This trigger fires when the specified curtain is fully opened/closed.

This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.

This trigger fires when the door and window sensor is closed.

This trigger fires when the temperature drops to the specified value.

This trigger fires when the tvoc drops to the specified value.

This trigger fires when the cube was pushed.

This trigger fires when the tvoc reaches the specified value.

This trigger fires when the the cube was flipped

This trigger fires when no natural gas is detected.

This trigger fires when natural gas is detected.

This trigger fires when the motion is detected and brightness is below the specified value.

This trigger fires when the drop is detected.

The battery of the device is low

This trigger fires when When Bell ringing is detected

This trigger fires when Forcible demolition alarm detected

This trigger fires when recognize the specified face

This trigger fires when recognize strange faces

This trigger fires when somebody is lingering at your doorstep

This trigger fires when the cube flip to side 1

This trigger fires when the cube flip to side 2

This trigger fires when the cube flip to side 3

This trigger fires when the cube flip to side 4

This trigger fires when the cube flip to side 5

This trigger fires when the cube flip to side 6

This trigger fires when an event is detected in the zone

This trigger fires when absence detected.

This query returns the on/off state of the device you choose

This query returns the current temperature.

This query returns the color temperature value of the device you choose

This query returns current humidity.

This query returns the color value of the device you choose

This query returns the brightness of the device you choose

This action will wake up / sleep of the specified camera.

This Action will turn on, turn off or toggle your lights.

This action will close the curtain of your choosing.

This Action will set your lights to a specified brightness.

This action will enable / disable sound detection of the specified camera.

This Action will change your lights to a specified color.

This action will open the curtain of your choosing to the designated position.

This Action will change your lights to specified color temperature.

This action will turn on/off the single rocker switches or module of your choosing.

This Action will set your lights to a pre-defined scene.

This action will disable sound detection of the specified camera.

This action will change your light's brightness to the specified level.

This action will sleep the specified camera.

This action will turn on/off the plug of your choosing.

This action will wake up the specified camera.

This action will open/close the curtain of your choosing.

This action will open the curtain of your choosing.

This action will stop the curtain of your choosing.

This action will enable / disable motion detection of the specified camera.

This action will turn on/off the light of your choosing.

This action will turn on/off the wireless relay controller of your choosing.

This action will disable motion detection of the specified camera.

This action will enable sound detection of the specified camera.

This action will enable motion detection of the specified camera.

This action will make feeder feed once

This action will set the color of the light

This action will Turn on/off the light of your choosing.

This action will run the light scenario