Connect HAVEN IAQ to TrickleStar Connected Products and unlock powerful automations

This trigger fires when TrickleStar Thermostat system mode or setpoint changes.

This Trigger fires whenever the measured Particulate Matter of 2.5 microns in size (PM2.5) is above or below the threshold.

This trigger fires when TrickleStar Thermostat occupancy changes.

This Trigger fires whenever the measured Relative Humidity (RH) is above or below the threshold.

This trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.

This Trigger fires whenever the measured temperature is above or below the threshold.

This trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.

This Trigger fires whenever the measured Volatile Organic Compounds (VOCs) is above or below the threshold.

This trigger fires when TrickleStar Water Heater Controller detects a leak.

This query returns a list of all my TrickleStar devices and their online status.

This query returns a list of all the different event types.

This action turns on your TrickleStar Connected Product.

This action turns off your TrickleStar Connected Product.

This action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.

This action will resume schedule on your TrickleStar thermostat.

This action sets the HVAC fan on on your TrickleStar Thermostat.

This action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.

This action turns on the HVAC fan for one run cycle, with a configurable fan run duration.

This action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".