When VOC levels become unhealthy, toggle a Kasa Switch or Plug & create a Google Calendar event
Start today
Triggers (If this)
Actions (Then that)
Other popular HAVEN IAQ workflows and automations
-
-
-
Set My Thermostat Fan to Run Once When Haven IAQ VOC Level Reaches an Unhealthy Reading
-
-
When PM2.5 readings return to healthy levels, turn off Levoit Air Purifier
-
-
When PM2.5 levels become unhealthy, set Lennox iComfort fan to On
-
-
When PM2.5 readings return to healthy levels, set Honeywell Total Connect fan back to Auto
-
-
When Relative Humidity readings return to acceptable levels, turn off Kasa Switch or Plug
-
-
Set My Thermostat Fan to Run Once When Haven IAQ PM Level Reaches an Unhealthy Reading
-
-
Set my thermostat fan to continuous for 30 min when HAVEN detects unhealthy PM2.5 levels
-
-
When PM2.5 levels become unhealthy, toggle a Kasa Switch or Plug & create a Google Calendar event
-
Useful HAVEN IAQ and TrickleStar Connected Products integrations
Triggers (If this)
-
Thermostat mode or setpoint changes
This trigger fires when TrickleStar Thermostat system mode or setpoint changes.
-
PM2.5 threshold is crossed
This Trigger fires whenever the measured Particulate Matter of 2.5 microns in size (PM2.5) is above or below the threshold.
-
Thermostat occupancy changes
This trigger fires when TrickleStar Thermostat occupancy changes.
-
Relative Humidity threshold is crossed
This Trigger fires whenever the measured Relative Humidity (RH) is above or below the threshold.
-
Thermostat room temperature is greater than
This trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
-
Temperature threshold is crossed
This Trigger fires whenever the measured temperature is above or below the threshold.
-
Thermostat room temperature is less than
This trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
-
VOC threshold is crossed
This Trigger fires whenever the measured Volatile Organic Compounds (VOCs) is above or below the threshold.
-
WHC detects a leak
This trigger fires when TrickleStar Water Heater Controller detects a leak.
Thermostat mode or setpoint changes
This trigger fires when TrickleStar Thermostat system mode or setpoint changes.
PM2.5 threshold is crossed
This Trigger fires whenever the measured Particulate Matter of 2.5 microns in size (PM2.5) is above or below the threshold.
Thermostat occupancy changes
This trigger fires when TrickleStar Thermostat occupancy changes.
Relative Humidity threshold is crossed
This Trigger fires whenever the measured Relative Humidity (RH) is above or below the threshold.
Thermostat room temperature is greater than
This trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
Temperature threshold is crossed
This Trigger fires whenever the measured temperature is above or below the threshold.
Thermostat room temperature is less than
This trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
VOC threshold is crossed
This Trigger fires whenever the measured Volatile Organic Compounds (VOCs) is above or below the threshold.
WHC detects a leak
This trigger fires when TrickleStar Water Heater Controller detects a leak.
Queries (With)
Actions (Then that)
-
Turn device on
This action turns on your TrickleStar Connected Product.
-
Turn device off
This action turns off your TrickleStar Connected Product.
-
Set thermostat temporary hold
This action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
-
Resume thermostat schedule
This action will resume schedule on your TrickleStar thermostat.
-
Set thermostat fan on
This action sets the HVAC fan on on your TrickleStar Thermostat.
-
Set thermostat fan to auto
This action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
-
Set thermostat fan to run once
This action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
-
Schedule vacation event
This action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
Turn device on
This action turns on your TrickleStar Connected Product.
Turn device off
This action turns off your TrickleStar Connected Product.
Set thermostat temporary hold
This action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
Resume thermostat schedule
This action will resume schedule on your TrickleStar thermostat.
Set thermostat fan on
This action sets the HVAC fan on on your TrickleStar Thermostat.
Set thermostat fan to auto
This action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
Set thermostat fan to run once
This action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
Schedule vacation event
This action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
IFTTT helps all your apps and devices work better together