Preheat your home before on-peak hours start
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Other popular BlueLink Smart Connect workflows and automations
-
-
-
When temperature drops below a certain point, start emergency heating
-
-
If the temperature outside rise above a chosen point, set the cool to chosen temperature
-
-
Turn on the fan for one hour
-
-
When pressing a button, turn off the system and fan
1
-
-
Every day at a certain time, modify the temperature in the room
-
-
If the temperature outside drops below a chosen point, set the heat to chosen temperature
-
-
When You Enter an Area Change Room Temperature
-
-
Increase the cooling temperature of your home during on-peak hours
-
Useful BlueLink Smart Connect and Genius Hub integrations
Triggers (If this)
-
System Mode Change
This trigger fires when the system mode changes
-
Zone temperature exceeds a threshold
This trigger fires every time the zone temperature exceeds a threshold. Only zones which display a measured temperature on the app can be selected.
-
Room Temperature Drops Below
This trigger fires when the temperature in the room drops below the chosen temperature
-
Zone temperature falls below a threshold
This trigger fires every time the zone temperature drops below a threshold. Only zones which display a measured temperature on the app can be selected.
-
Room Temperature Rises Above
This trigger fires when the temperature in the room rise above the chosen temperature
-
Zone is being occupied
This trigger fires every time occupancy is detected in a zone. Only zones with a Room Sensor assigned can be selected.
-
Room Humidity Drops Below
This trigger fires when the humidity in the room drops below the specified percentage
-
Zone is being heated
The Trigger fires every time the zone heating turns on.
-
Room Humidity Rises Above
This trigger fires when the humidity in the room rises above the specified percentage
-
An assigned device has a low battery
This trigger fires every time an assigned device on your system gets a low battery.
-
Fan Mode Change
This trigger fires when fan mode is changed to the specified value
-
Hold Status Change
This trigger fires when the hold status of the device is changed to the specified value
-
Set Temperature Changes To Above X
This trigger fires when you set the setpoint of either heat or cool to a temperature above a threshold specified by you
-
Set Temperature Changes To Below X
This trigger fires when you set the setpoint of either heat or cool to a temperature below a threshold specified by you
-
Low Remote Sensor Battery
This trigger fires when the remote sensor battery is low
-
Low Thermostat Battery
This trigger fires when the thermostat battery is low
-
Check Warning
This trigger fires when the check warning activates
-
UV Warning
This trigger fires when the UV warning activates
-
HUMID PADS Warning
This trigger fires when the HUMID PADS warning activates
-
Filter Warning
This trigger fires when the filter warning activates
System Mode Change
This trigger fires when the system mode changes
Zone temperature exceeds a threshold
This trigger fires every time the zone temperature exceeds a threshold. Only zones which display a measured temperature on the app can be selected.
Room Temperature Drops Below
This trigger fires when the temperature in the room drops below the chosen temperature
Zone temperature falls below a threshold
This trigger fires every time the zone temperature drops below a threshold. Only zones which display a measured temperature on the app can be selected.
Room Temperature Rises Above
This trigger fires when the temperature in the room rise above the chosen temperature
Zone is being occupied
This trigger fires every time occupancy is detected in a zone. Only zones with a Room Sensor assigned can be selected.
Room Humidity Drops Below
This trigger fires when the humidity in the room drops below the specified percentage
Zone is being heated
The Trigger fires every time the zone heating turns on.
Room Humidity Rises Above
This trigger fires when the humidity in the room rises above the specified percentage
An assigned device has a low battery
This trigger fires every time an assigned device on your system gets a low battery.
Fan Mode Change
This trigger fires when fan mode is changed to the specified value
Hold Status Change
This trigger fires when the hold status of the device is changed to the specified value
Set Temperature Changes To Above X
This trigger fires when you set the setpoint of either heat or cool to a temperature above a threshold specified by you
Set Temperature Changes To Below X
This trigger fires when you set the setpoint of either heat or cool to a temperature below a threshold specified by you
Low Remote Sensor Battery
This trigger fires when the remote sensor battery is low
Low Thermostat Battery
This trigger fires when the thermostat battery is low
Check Warning
This trigger fires when the check warning activates
UV Warning
This trigger fires when the UV warning activates
HUMID PADS Warning
This trigger fires when the HUMID PADS warning activates
Filter Warning
This trigger fires when the filter warning activates
Queries (With)
-
History of the zone temperature falling below a threshold
This query returns a recent list of when the zone temperature fell below a certain threshold. Only zones that display a measured temperature on the app can be selected. Note: this query will only return future events after this Applet is created.
-
Device State
This query returns the current state of the selected device
-
History of Zone being occupied
This query returns a list of when occupancy was detected in a zone. Only zones with a Room Sensor assigned can be selected.
-
On-peak hours interval
This query returns validated interval for on-peak hours
-
History of when a device has a low battery
This query returns a list of when an assigned device on your system had a low battery.
History of the zone temperature falling below a threshold
This query returns a recent list of when the zone temperature fell below a certain threshold. Only zones that display a measured temperature on the app can be selected. Note: this query will only return future events after this Applet is created.
Device State
This query returns the current state of the selected device
History of Zone being occupied
This query returns a list of when occupancy was detected in a zone. Only zones with a Room Sensor assigned can be selected.
On-peak hours interval
This query returns validated interval for on-peak hours
History of when a device has a low battery
This query returns a list of when an assigned device on your system had a low battery.
Actions (Then that)
-
Change Room Temperature
This action will change the current room temperature. Will either HEAT or COOL, based on what temperature is the thermostat is showing.
-
Override a 'radiator' zone
Override a zone's temperature for a given duration.
-
Change Cool Setpoint
This action will change the current cool setpoint of the selected device.
-
Override an 'on / off' zone
Override a zone to 'on' or 'off' for a given duration.
-
Change Heat Setpoint
This action will change the current heat setpoint of the selected device.
-
Override a 'hot water' zone
Override a zone's temperature for a given duration.
-
Change Hold Status
This action will change the current hold status of the device (either ENABLED or DISABLED)
-
Override a 'underfloor' zone
Override a zone's temperature for a given duration.
-
Change System Mode
This action will change the current running mode of the device
-
Change Fan Mode
This action will change the current fan mode of the device
-
Change Hold Mode
This action will change the current hold mode of the device
Change Room Temperature
This action will change the current room temperature. Will either HEAT or COOL, based on what temperature is the thermostat is showing.
Override a 'radiator' zone
Override a zone's temperature for a given duration.
Change Cool Setpoint
This action will change the current cool setpoint of the selected device.
Override an 'on / off' zone
Override a zone to 'on' or 'off' for a given duration.
Change Heat Setpoint
This action will change the current heat setpoint of the selected device.
Override a 'hot water' zone
Override a zone's temperature for a given duration.
Change Hold Status
This action will change the current hold status of the device (either ENABLED or DISABLED)
Override a 'underfloor' zone
Override a zone's temperature for a given duration.
Change System Mode
This action will change the current running mode of the device
Change Fan Mode
This action will change the current fan mode of the device
Change Hold Mode
This action will change the current hold mode of the device
IFTTT helps all your apps and devices work better together