This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.

This trigger fires every time the zone temperature exceeds a threshold. Only zones which display a measured temperature on the app can be selected.

This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.

This trigger fires every time the zone temperature drops below a threshold. Only zones which display a measured temperature on the app can be selected.

This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.

This trigger fires every time occupancy is detected in a zone. Only zones with a Room Sensor assigned can be selected.

This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

The Trigger fires every time the zone heating turns on.

This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This trigger fires every time an assigned device on your system gets a low battery.

This query returns a list of when your WeMo Maker relay was turned on in momentary mode.

This query returns a recent list of when the zone temperature fell below a certain threshold. Only zones that display a measured temperature on the app can be selected. Note: this query will only return future events after this Applet is created.

This query returns a list of times a signal was not detected by an enabled sensor.

This query returns a list of when occupancy was detected in a zone. Only zones with a Room Sensor assigned can be selected.

This query returns a list of times a signal was detected by an enabled sensor.

This query returns a list of when an assigned device on your system had a low battery.

This query returns a list of when your WeMo Maker relay was turned off in toggle mode.

This query returns a list of when your WeMo Maker relay was turned on in toggle mode.

This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.

Override a zone's temperature for a given duration.

This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.

Override a zone to 'on' or 'off' for a given duration.

This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.

Override a zone's temperature for a given duration.

This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.

Override a zone's temperature for a given duration.

This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.

This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.

This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.

This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.