Turn on the heat when someone gets home
Start today
Other popular Heatmiser workflows and automations
- Turn Boiler off
- Low Outside Temp Heating Boost
- Door/Window Open - Heating Off
- Activate Standby Mode if the outside temperature rises above a certain level
- Activate Standby Mode on the selected Heatmiser Thermostat when Apilio triggers and action (2)
- If you click the Flic button, then enable Away on your Heatmiser
- Receive a notification when your home temperature drops
- If Window/Door opened, place heating zone into Standby mode.
Useful Heatmiser and UbiBot integrations
Triggers (If this)
- Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.
- Temperature rises aboveThis Trigger fires every time the temperature rises above a threshold you specify.
- (Universal) Any Channel Field Value Rises above or Drops belowThis trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.
- Temperature drops belowThis Trigger fires every time the temperature drops above a threshold you specify.
- Humidity Rises above or Drops belowThis trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.
- neoHub Away ModeThis trigger fires when your neoHub is set to away mode.
- Light Rises above or Drops belowThis trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.
- neoHub Home ModeTriggers when your neoHub returns to Home Mode.
- Voltage Rises above or Drops belowThis trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.
- Low BatteryThis trigger fires when your Heatmiser Device has a Low Battery.
- External Power Supply is Up or DownThis trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.
- Contact Sensor ClosedThis trigger fires when the Contact Sensor is closed
- Device is offlineThis trigger fires when your UbiBot device is offline.
- Contact Sensor OpenThis trigger fires when the Contact Sensor is opened
- Motion is Detected or Undetected from Motion SensorThis trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.
- External-DS18B20-Temperature-Probe-1 Rises above or Drops belowThis trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).
- External-DS18B20-Temperature-Probe-2 Rises above or Drops belowThis trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)
- External-TH30S-Probe-Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
- External-TH30S-Probe-Humidity Rises above or Drops belowThis trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
- External-Soil-Probe-Moisture Rises above or Drops belowThis trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.
- External-Soil-Probe-Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.
- External-PT100-Probe Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.
- Vibration Index Rises above or Drops belowThis trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.
- Carbon Dioxide (CO2) Rises above or Drops belowThis trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.
Queries (With)
- History of vibration index rises above or drops below thresholdThis query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
- History of light crossed a thresholdThis query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.
- History of External-Soil-Probe-Moisture Rises above or drops belowThis query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
- History of Sensor Data ReceivedThis query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.
Actions (Then that)
- Cancel temperature holdThis Action will cancel a temperature hold on the selected Heatmiser Thermostat.
- (Universal) Send Command to Any ChannelSend Action Command to Any Target Channel
- Set temperature holdThis Action will enable a temperature hold on the selected Heatmiser Thermostat.
- (Universal) Send RAW Command to Any ChannelSend Action RAW Command to Any Target Channel
- Turn neoPlug onThis Action will allow you to switch on the selected neoPlug.
- Turn On or Off your UbiBot Smart PlugSend Action Command to Turn On or Off your UbiBot Smart Plug
- Turn neoPlug offThis Action will turn off the selected neoPlug.
- Turn On or Off your Network Relay SwitchSend Action Command to Turn On or Off your UbiBot Network Relay Switch
- Set TemperatureThe Action will set the temperature on the selected Heatmiser Thermostat.
- Boost TimerThis Action will activate a Timer Boost on the selected Heatmiser Timer.
- Set Away ModeThis Action will activate Away Mode on your neoHub
- Set Home ModeThe Action will activate Home Mode on your neoHub.
- Set Standby ModeThis Action will activate Standby Mode on the selected Heatmiser Thermostat.
- Cancel Standby ModeThis Action will cancel Standby Mode on the selected Heatmiser Thermostat.
- Run ProfileThis action will send a stored profile to the selected thermostat.
- Run recipeThis action will run a Heatmiser Neo recipe.
IFTTT helps all your apps and devices work better together