Connect Heatmiser to WeMo Maker and unlock powerful automations

This Trigger fires every time the temperature rises above a threshold you specify.

This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.

This Trigger fires every time the temperature drops above a threshold you specify.

This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.

This trigger fires when your neoHub is set to away mode.

This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.

Triggers when your neoHub returns to Home Mode.

This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This trigger fires when your Heatmiser Device has a Low Battery.

This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This trigger fires when the Contact Sensor is closed

This trigger fires when the Contact Sensor is opened

This query returns a list of when your WeMo Maker relay was turned on in momentary mode.

This query returns a list of times a signal was not detected by an enabled sensor.

This query returns a list of times a signal was detected by an enabled sensor.

This query returns a list of when your WeMo Maker relay was turned off in toggle mode.

This query returns a list of when your WeMo Maker relay was turned on in toggle mode.

This Action will cancel a temperature hold on the selected Heatmiser Thermostat.

This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.

This Action will enable a temperature hold on the selected Heatmiser Thermostat.

This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.

This Action will allow you to switch on the selected neoPlug.

This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.

This Action will turn off the selected neoPlug.

This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.

The Action will set the temperature on the selected Heatmiser Thermostat.

This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.

This Action will activate a Timer Boost on the selected Heatmiser Timer.

This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.

This Action will activate Away Mode on your neoHub

This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.

The Action will activate Home Mode on your neoHub.

This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This Action will activate Standby Mode on the selected Heatmiser Thermostat.

This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This Action will cancel Standby Mode on the selected Heatmiser Thermostat.

This action will send a stored profile to the selected thermostat.

This action will run a Heatmiser Neo recipe.