Open valve when Ambient Weather detects a temperature above a specified threshold
Other popular Ambient Weather workflows and automations
-
-
-
Switch on fan that cools solar inverter
-
-
Turn off your sprinklers when it's too windy
51
-
-
Close your Hunter Douglas blinds when it's too hot
1
-
-
Tweet when a parameter falls below a given value
1
-
-
If Your device or Weather Station has not reported for 20 minutes.
23
-
-
If Ambient weather station rain > .12, then retract Somfy awning
-
-
Do not water my yard if Ambient detects rain
2
-
-
Report today's rainfall measurement from Netatmo to Netro
-
Build your own Ambient Weather and Wyze automations
Triggers (If this)
-
Motion is detected
This trigger fires when a Wyze Cam detects motion. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Device stops reporting
This trigger fires when your device hasn't reported for 20 minutes.
-
Sound is detected
This trigger fires when a Wyze Cam detects sound. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Outdoor Temperature rises above
This trigger fires when the outdoor temperature rises above a given value.
-
Smoke alarm is detected
This trigger fires when a Wyze Cam detects a smoke alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Outdoor Temperature falls below
This trigger fires when the Outdoor Temperature falls below a given value.
-
CO alarm is detected
This trigger fires when a Wyze Cam detects a CO alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Wind Speed rises above
This trigger fires when the wind speed rises above a given value.
-
Contact Sensor opens
This trigger fires when a Contact Sensor opens.
-
UV rises above
This trigger fires when the UV Index rises above a given value.
-
Contact Sensor closes
This trigger fires when a Contact Sensor closes.
-
Daily Rain rises above
This trigger fires when the Daily Rain measurement rises above a given threshold.
-
Motion Sensor detects motion
This trigger fires when a Motion Sensor detects motion.
-
Parameter rises above
This trigger fires when a given parameter exceed a given threshold.
-
Motion Sensor becomes clear
This trigger fires when a Motion Sensor becomes clear.
-
Parameter falls below
This trigger fires when a given parameter falls below a certain threshold.
-
Low battery is detected
This trigger fires when a Wyze Cam Outdoor detects a low battery status.
-
Doorbell is pressed
This trigger fires when your Wyze Doorbell is pressed.
-
Wyze Lock unlocked
This Trigger fires when your Wyze Lock is unlocked.
-
Wyze Lock locked
This Trigger fires when your Wyze Lock is locked.
-
Plug Turns on
This trigger fires when a Wyze Plug is turned on.
-
Plug Turns off
This trigger fires when a Wyze Plug is turned off.
-
Bulb Turns on
This trigger fires when a Wyze Bulb is turned on.
-
Bulb Turns off
This trigger fires when a Wyze Bulb is turned off.
-
Switch turns on
This trigger fires when your Wyze Switch is turned on.
-
Switch turns off
This trigger fires when your Wyze Switch is turned off.
-
Switch is double pressed
This trigger fires when your Wyze Switch is pressed.
-
Switch is triple pressed
This trigger fires when your Wyze Switch is triple pressed.
-
Switch is hold pressed
This trigger fires when your Wyze Switch is hold pressed.
Motion is detected
This trigger fires when a Wyze Cam detects motion. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Device stops reporting
This trigger fires when your device hasn't reported for 20 minutes.
Sound is detected
This trigger fires when a Wyze Cam detects sound. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Outdoor Temperature rises above
This trigger fires when the outdoor temperature rises above a given value.
Smoke alarm is detected
This trigger fires when a Wyze Cam detects a smoke alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Outdoor Temperature falls below
This trigger fires when the Outdoor Temperature falls below a given value.
CO alarm is detected
This trigger fires when a Wyze Cam detects a CO alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Wind Speed rises above
This trigger fires when the wind speed rises above a given value.
Contact Sensor opens
This trigger fires when a Contact Sensor opens.
UV rises above
This trigger fires when the UV Index rises above a given value.
Contact Sensor closes
This trigger fires when a Contact Sensor closes.
Daily Rain rises above
This trigger fires when the Daily Rain measurement rises above a given threshold.
Motion Sensor detects motion
This trigger fires when a Motion Sensor detects motion.
Parameter rises above
This trigger fires when a given parameter exceed a given threshold.
Motion Sensor becomes clear
This trigger fires when a Motion Sensor becomes clear.
Parameter falls below
This trigger fires when a given parameter falls below a certain threshold.
Low battery is detected
This trigger fires when a Wyze Cam Outdoor detects a low battery status.
Doorbell is pressed
This trigger fires when your Wyze Doorbell is pressed.
Wyze Lock unlocked
This Trigger fires when your Wyze Lock is unlocked.
Wyze Lock locked
This Trigger fires when your Wyze Lock is locked.
Plug Turns on
This trigger fires when a Wyze Plug is turned on.
Plug Turns off
This trigger fires when a Wyze Plug is turned off.
Bulb Turns on
This trigger fires when a Wyze Bulb is turned on.
Bulb Turns off
This trigger fires when a Wyze Bulb is turned off.
Switch turns on
This trigger fires when your Wyze Switch is turned on.
Switch turns off
This trigger fires when your Wyze Switch is turned off.
Switch is double pressed
This trigger fires when your Wyze Switch is pressed.
Switch is triple pressed
This trigger fires when your Wyze Switch is triple pressed.
Switch is hold pressed
This trigger fires when your Wyze Switch is hold pressed.
Queries (With)
-
History of plugs turned on
This query returns a list of instances when a Wyze Plug was turned on.
-
History of Wind Speed rises above threshold
This query returns a list of when the wind speed rose above a given value. Note: this query will only return future events after this Applet is created.
-
History of Smoke alarm alerts
This query returns a list of times when a Wyze Cam detected a smoke alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
History of Outdoor Temperature drops
This query returns a list of when the Outdoor Temperature has fallen below the given value. Note: this query will only return future events after this Applet is created.
-
History of Sound detected alerts
This query returns a list of events when a Wyze Cam detected sound. The minimum firmware version required was v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
History of Device not reporting alerts
This query returns a list of events when your device stopped reporting for at least 20 minutes.
-
History of Contact Sensor closes
This query returns a list of when a Contact Sensor closes.
-
History of outdoor temperature rising above a temperature
This query returns a list of when the outdoor temperature rose above a given value. Note: this query will only return future events after this Applet is created.
-
History of Motion Sensor becomes clear
This query returns a list of when a Motion Sensor becomes clear.
-
History of parameter falls
This query returns a list of events when the parameter fell below a certain threshold. Note: this query will only return future events after this Applet is created.
-
History of Motion Sensor detects motion
This query returns a list of when a Motion Sensor detects motion.
-
History of Parameter exceeds threshold
This query returns a list of events when a given parameter exceed a given threshold. Note: this query will only return future events after this Applet is created.
-
History of Contact Sensor opens
This query returns a list of when a Contact Sensor opens.
-
History of Daily Rain rises above
This query returns a list of when the Daily Rain measurement rises above a given threshold. Note: this query will only return future events after this Applet is created.
-
History of motion being detected
This query returns a list of when a Wyze Cam detected motion. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
History of when UV rose above a threshold
This query returns a list of when the UV Index rose above a given value. Note: this query will only return future events after this Applet is created.
-
History of a Wyze Bulb turning off
This query returns a list of when a Wyze Bulb is turned off.
History of plugs turned on
This query returns a list of instances when a Wyze Plug was turned on.
History of Wind Speed rises above threshold
This query returns a list of when the wind speed rose above a given value. Note: this query will only return future events after this Applet is created.
History of Smoke alarm alerts
This query returns a list of times when a Wyze Cam detected a smoke alarm. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
History of Outdoor Temperature drops
This query returns a list of when the Outdoor Temperature has fallen below the given value. Note: this query will only return future events after this Applet is created.
History of Sound detected alerts
This query returns a list of events when a Wyze Cam detected sound. The minimum firmware version required was v3.9.3.62 for v1 and v4.9.1.60 for v2.
History of Device not reporting alerts
This query returns a list of events when your device stopped reporting for at least 20 minutes.
History of Contact Sensor closes
This query returns a list of when a Contact Sensor closes.
History of outdoor temperature rising above a temperature
This query returns a list of when the outdoor temperature rose above a given value. Note: this query will only return future events after this Applet is created.
History of Motion Sensor becomes clear
This query returns a list of when a Motion Sensor becomes clear.
History of parameter falls
This query returns a list of events when the parameter fell below a certain threshold. Note: this query will only return future events after this Applet is created.
History of Motion Sensor detects motion
This query returns a list of when a Motion Sensor detects motion.
History of Parameter exceeds threshold
This query returns a list of events when a given parameter exceed a given threshold. Note: this query will only return future events after this Applet is created.
History of Contact Sensor opens
This query returns a list of when a Contact Sensor opens.
History of Daily Rain rises above
This query returns a list of when the Daily Rain measurement rises above a given threshold. Note: this query will only return future events after this Applet is created.
History of motion being detected
This query returns a list of when a Wyze Cam detected motion. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
History of when UV rose above a threshold
This query returns a list of when the UV Index rose above a given value. Note: this query will only return future events after this Applet is created.
History of a Wyze Bulb turning off
This query returns a list of when a Wyze Bulb is turned off.
Actions (Then that)
-
Turn on notifications
This action will turn on notifications for your camera alerts.
-
Turn off notifications
This action will turn off notifications for your camera alerts.
-
Turn on device
This action will turn on your selected camera. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Turn off device
This action will turn off your selected camera. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Restart device
This action will restart your selected camera. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Record a short video clip
This action will record an alert video and store it on the cloud. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Enable motion detection
This action will turn on your device's motion detection. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Disable motion detection
This action will turn off your device's motion detection. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
-
Unlock Wyze Lock
This Action will unlock your Wyze Lock.
-
Lock Wyze Lock
This Action will lock your Wyze Lock.
-
Turn plug on
This action will turn the plug on.
-
Turn plug off
This action will turn the plug off.
-
Turn switch on
This action will turn on your Wyze Switch.
-
Turn switch off
This action will turn off your Wyze Switch.
-
Turn bulb on
This action will turn the bulb on.
-
Turn bulb off
This action will turn the bulb off.
-
Set bulb brightness
This action will change the brightness of the bulb.
-
Change color
This Action will change the color of your Wyze Bulb Color.
-
Set bulb color temperature
This action will change the color temperature of the bulb.
Turn on notifications
This action will turn on notifications for your camera alerts.
Turn off notifications
This action will turn off notifications for your camera alerts.
Turn on device
This action will turn on your selected camera. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Turn off device
This action will turn off your selected camera. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Restart device
This action will restart your selected camera. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Record a short video clip
This action will record an alert video and store it on the cloud. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Enable motion detection
This action will turn on your device's motion detection. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Disable motion detection
This action will turn off your device's motion detection. This action does not apply to shared cameras. The minimum firmware version required is v3.9.3.62 for v1 and v4.9.1.60 for v2.
Unlock Wyze Lock
This Action will unlock your Wyze Lock.
Lock Wyze Lock
This Action will lock your Wyze Lock.
Turn plug on
This action will turn the plug on.
Turn plug off
This action will turn the plug off.
Turn switch on
This action will turn on your Wyze Switch.
Turn switch off
This action will turn off your Wyze Switch.
Turn bulb on
This action will turn the bulb on.
Turn bulb off
This action will turn the bulb off.
Set bulb brightness
This action will change the brightness of the bulb.
Change color
This Action will change the color of your Wyze Bulb Color.
Set bulb color temperature
This action will change the color temperature of the bulb.
How to connect Ambient Weather and Wyze
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Ambient Weather and Wyze accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together