When temperature drops below a certain point, start emergency heating
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Other popular BlueLink Smart Connect workflows and automations
-
-
-
Decrease the heating temperature of your home during on-peak hours
-
-
Turn on the fan for one hour
-
-
If the temperature outside drops below a chosen point, set the heat to chosen temperature
-
-
When pressing a button, turn off the system and fan
1
-
-
When You Enter an Area Change Room Temperature
-
-
Preheat your home before on-peak hours start
-
-
Turn on Cooling and Text Me When Outside Temp Rises
-
-
If the temperature outside rise above a chosen point, set the cool to chosen temperature
-
Useful BlueLink Smart Connect and Smappee integrations
Triggers (If this)
-
System Mode Change
This trigger fires when the system mode changes
-
Appliance turns on
This Trigger fires when the selected appliance is turned on.
-
Room Temperature Drops Below
This trigger fires when the temperature in the room drops below the chosen temperature
-
Appliance turns off
This Trigger fires when the selected appliance is turned off.
-
Room Temperature Rises Above
This trigger fires when the temperature in the room rise above the chosen temperature
-
Power rises above
This Trigger fires every time the power rises above the specified value in watts.
-
Room Humidity Drops Below
This trigger fires when the humidity in the room drops below the specified percentage
-
Power drops below
This Trigger fires every time the power drops below the specified value in watts.
-
Room Humidity Rises Above
This trigger fires when the humidity in the room rises above the specified percentage
-
Solar power rises above
This Trigger fires every time the solar power rises above the specified value in watts.
-
Fan Mode Change
This trigger fires when fan mode is changed to the specified value
-
Solar power drops below
This trigger fires when the solar power drops below the specified value in watts.
-
Hold Status Change
This trigger fires when the hold status of the device is changed to the specified value
-
Set Temperature Changes To Above X
This trigger fires when you set the setpoint of either heat or cool to a temperature above a threshold specified by you
-
Set Temperature Changes To Below X
This trigger fires when you set the setpoint of either heat or cool to a temperature below a threshold specified by you
-
Low Remote Sensor Battery
This trigger fires when the remote sensor battery is low
-
Low Thermostat Battery
This trigger fires when the thermostat battery is low
-
Check Warning
This trigger fires when the check warning activates
-
UV Warning
This trigger fires when the UV warning activates
-
HUMID PADS Warning
This trigger fires when the HUMID PADS warning activates
-
Filter Warning
This trigger fires when the filter warning activates
System Mode Change
This trigger fires when the system mode changes
Appliance turns on
This Trigger fires when the selected appliance is turned on.
Room Temperature Drops Below
This trigger fires when the temperature in the room drops below the chosen temperature
Appliance turns off
This Trigger fires when the selected appliance is turned off.
Room Temperature Rises Above
This trigger fires when the temperature in the room rise above the chosen temperature
Power rises above
This Trigger fires every time the power rises above the specified value in watts.
Room Humidity Drops Below
This trigger fires when the humidity in the room drops below the specified percentage
Power drops below
This Trigger fires every time the power drops below the specified value in watts.
Room Humidity Rises Above
This trigger fires when the humidity in the room rises above the specified percentage
Solar power rises above
This Trigger fires every time the solar power rises above the specified value in watts.
Fan Mode Change
This trigger fires when fan mode is changed to the specified value
Solar power drops below
This trigger fires when the solar power drops below the specified value in watts.
Hold Status Change
This trigger fires when the hold status of the device is changed to the specified value
Set Temperature Changes To Above X
This trigger fires when you set the setpoint of either heat or cool to a temperature above a threshold specified by you
Set Temperature Changes To Below X
This trigger fires when you set the setpoint of either heat or cool to a temperature below a threshold specified by you
Low Remote Sensor Battery
This trigger fires when the remote sensor battery is low
Low Thermostat Battery
This trigger fires when the thermostat battery is low
Check Warning
This trigger fires when the check warning activates
UV Warning
This trigger fires when the UV warning activates
HUMID PADS Warning
This trigger fires when the HUMID PADS warning activates
Filter Warning
This trigger fires when the filter warning activates
Queries (With)
-
History of soloar power rises
This query returns a list of when the solar power has risen above the specified value in watts. Note: this query will only return future events after this Applet is created.
-
Device State
This query returns the current state of the selected device
-
History of Power exceeded threshold
This query returns a list of times when the power rose above the specified value in watts. Note: this query will only return future events after this Applet is created.
-
On-peak hours interval
This query returns validated interval for on-peak hours
-
History of when power dropped below a threshold
This query returns a list of when the power dropped below the specified value in watts. Note: this query will only return future events after this Applet is created.
History of soloar power rises
This query returns a list of when the solar power has risen above the specified value in watts. Note: this query will only return future events after this Applet is created.
Device State
This query returns the current state of the selected device
History of Power exceeded threshold
This query returns a list of times when the power rose above the specified value in watts. Note: this query will only return future events after this Applet is created.
On-peak hours interval
This query returns validated interval for on-peak hours
History of when power dropped below a threshold
This query returns a list of when the power dropped below the specified value in watts. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Change Room Temperature
This action will change the current room temperature. Will either HEAT or COOL, based on what temperature is the thermostat is showing.
-
Turn on plug
This Action will turn on a plug for the specified duration.
-
Change Cool Setpoint
This action will change the current cool setpoint of the selected device.
-
Turn off plug
This Action will turn off a plug for the specified duration.
-
Change Heat Setpoint
This action will change the current heat setpoint of the selected device.
-
Change Hold Status
This action will change the current hold status of the device (either ENABLED or DISABLED)
-
Change System Mode
This action will change the current running mode of the device
-
Change Fan Mode
This action will change the current fan mode of the device
-
Change Hold Mode
This action will change the current hold mode of the device
Change Room Temperature
This action will change the current room temperature. Will either HEAT or COOL, based on what temperature is the thermostat is showing.
Turn on plug
This Action will turn on a plug for the specified duration.
Change Cool Setpoint
This action will change the current cool setpoint of the selected device.
Turn off plug
This Action will turn off a plug for the specified duration.
Change Heat Setpoint
This action will change the current heat setpoint of the selected device.
Change Hold Status
This action will change the current hold status of the device (either ENABLED or DISABLED)
Change System Mode
This action will change the current running mode of the device
Change Fan Mode
This action will change the current fan mode of the device
Change Hold Mode
This action will change the current hold mode of the device
IFTTT helps all your apps and devices work better together