Connect domovea to WeMo Maker and unlock powerful automations

This Trigger fires every time your device is switched on.

This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.

This Trigger fires every time your device is switched off.

This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.

This Trigger fires every time your Security system is armed.

This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.

This Trigger fires every time your security system is disarmed.

This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This Trigger fires every time an intrusion is detected by your security system.

This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This Trigger fires every time your device detects room temperature above the value you specified.

This Trigger fires every time your device detects indoor temperature below the value you specified.

This Trigger fires every time your shades are opened.

This Trigger fires every time your shades are closed.

This Trigger fires every time your thermostat reaches the temperature you specified.

This Trigger fires every time a scene is launched.

This Trigger fires every time the wind speed is equal to the value you specified.

This Trigger fires every time when the CO2 is equal to the ppm you specified.

This Trigger fires every time when the indoor humidity is equal to the percentage you specified.

This Trigger fires every time when the luminosity is equal to the value you specified.

This Trigger fires every time when the brightness is equal to the value you specified.

This Trigger fires every time when it is raining.

This Trigger fires every time when the outdoor temperature is equal to the value you specified.

This Trigger fires every time when the indoor temperature is equal to the value you specified.

This Trigger fires every time when the outdoor humidity is equal to the percentage you specified.

This Trigger fires every time when the smoke alarm goes off.

This query returns a list of recent times when the outdoor temperature was at a specified value in celcius.

This query returns a list of when your WeMo Maker relay was turned on in momentary mode.

This query returns a list of when CO2 is recorded at a specified ppm.

This query returns a list of times a signal was not detected by an enabled sensor.

This query returns a list of when your security system was disarmed.

This query returns a list of times a signal was detected by an enabled sensor.

This query returns a list of when your shades are opened.

This query returns a list of when your WeMo Maker relay was turned off in toggle mode.

This query returns a list of when your device detected indoor temperature to be below the value that you specified. Note: this query will only return future events after this Applet is created.

This query returns a list of when your WeMo Maker relay was turned on in toggle mode.

This query returns a list of recent alerts when the brightness was equal to the value you specified.

This Action will turn on your devices that support switching on.

This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.

This Action will turn off your devices that support switching off.

This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.

This action will open the shade

This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.

This action will close the shade

This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.

This Action will set the shade to the position you specify.

This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.

This Action will set intensity to the percentage you specified.

This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.

This Action will set the thermostat to the mode you specified.

This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.

This Action will set the thermostat temperature setpoint to the value you specified.

This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This Action will play an audio tune.

This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This action will pause an audio tune.

This action will override the hot water.

This action will exempt hot water.

This Action will run a scene.