IFTTT
IFTTT
Explore
Plans
Log in
Get started
Mobile menu
Close menu
Back
Share this using the options below:
Epion to WeMo Maker integrations
Send this automation to anyone using the options below.
Copy
Or copy link
Copy
Share
Epion
to
WeMo Maker
integrations
Automate your workflows between Discord and Instagram with IFTTT.
Get started today
Get started today
Other popular Epion workflows and automations
Turn on your Hue connected ventilator when the CO₂ level rises above a certain level
Epion
Get a phone call when measured CO₂ rises above 1000 ppm
Epion
Change light color when measured CO₂ rises above 1000 ppm
Epion
Turn off your FIBARO connected ventilator when the CO₂ level dips above a certain level
Epion
Change device brightness on a schedule
Epion
Trigger Arlo siren when measured CO₂ rises above 2000 ppm
Epion
Turn off Philips Hue connected ventilator when the CO₂ level dips above a certain level
Epion
Log high CO₂ levels in Google Sheets
Epion
Automatically run WeMo humidifier when humidity is low
Epion
Build your own Epion and WeMo Maker automations
Triggers (If this)
CO₂ above a specified value
This trigger fires when the CO₂ level for a specific devices exceeded a specified threshold.
Relay on
This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.
CO₂ below a specified value
This trigger fires when the CO₂ level for a specific devices becomes lower than the specified threshold.
Relay off
This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.
Temperature above a specified value
This trigger fires when the temperature for a specific device exceeds the specified threshold.
Momentary on
This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.
Temperature below a specified value
This trigger fires when the temperature for a specific device becomes lower than the specified threshold.
Sensor triggered
This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.
Humidity below a specified value
This trigger fires when the humidity for a specific device becomes lower than the specified threshold.
Sensor not triggered
This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.
Humidity above a specified value
This trigger fires when the humidity for a specific device becomes higher than the specified threshold.
Queries (With)
History of being turned on in momentary mode
This query returns a list of when your WeMo Maker relay was turned on in momentary mode.
Retrieve latest measurements
This query returns the latest measurements of the selected Epion Air.
History of times a signal was not detected by an enabled sensor
This query returns a list of times a signal was not detected by an enabled sensor.
List all Epion Air
This query returns all your Epion Air devices.
History of times a signal was detected by an enabled sensor
This query returns a list of times a signal was detected by an enabled sensor.
History of relay offs
This query returns a list of when your WeMo Maker relay was turned off in toggle mode.
History of relay ons
This query returns a list of when your WeMo Maker relay was turned on in toggle mode.
Actions (Then that)
Turn relay on
This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.
Set brightness
This action will update the LED brightness for a specific device
Turn relay off
This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.
Toggle relay
This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.
Turn relay off then on
This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.
Turn relay on then off
This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.
Turn relay on momentarily
This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.
Turn relay on momentarily multiple times
This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.
Turn relay on then off multiple times
This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.
Turn relay off then on multiple times
This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.
How to connect Epion and WeMo Maker
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.
Connect IFTTT to your accounts
Securely connect your Epion and WeMo Maker accounts.
Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together
Start automating