Connect Aqara Home for US to WeMo Maker and unlock powerful automations

This trigger fires when the specified single rocker switch is turned on/off.

This Trigger fires every time your WeMo Maker relay is turned on in toggle mode.

This trigger fires when the specified double rocker switch is turned on/off.

This Trigger fires every time your WeMo Maker relay is turned off in toggle mode.

This trigger fires when the specified triple rocker switch is turned on/off.

This Trigger fires every time your WeMo Maker relay is turned on in momentary mode.

This trigger fires when the specified Relay Controller is turned on/off.

This Trigger fires every time a signal is detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This trigger fires when the specified light is turned on/off.

This Trigger fires every time a signal is not detected from your sensor. NOTE: The sensor must be enabled in your Maker's settings.

This trigger fires when the specified plug is turned on/off.

This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.

This trigger fires when the temperature reaches the specified value.

This trigger fires when the temperature drops to the specified value.

This trigger fires when the humidity reaches the specified value.

This trigger fires when the humidity drops to the specified value.

This trigger fires when the tvoc reaches the specified value.

This trigger fires when the tvoc drops to the specified value.

This trigger fires when the darkness is detected.

This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.

This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.

This trigger fires when motion is detected.

This trigger fires when water leak is detected.

This trigger fires when the water recedes.

This trigger fires when the door and window sensor is open.

This trigger fires when the door and window sensor is closed.

This trigger fires when the motion is detected and brightness is below the specified value.

This trigger fires when the motion is detected and brightness is above the specified value.

This trigger fires when the cube is triggered after one-minute inactivity.

This trigger fires when the the cube was flipped

This trigger fires when the cube was pushed.

This trigger fires when the cube was rotated.

This trigger fires when the cube was tapped twice.

This trigger fires when the cube was shaken.

This trigger fires when the drop is detected.

This trigger fires when the tilt is detected.

This trigger fires when the vibration is detected.

This trigger fires when the specified curtain is fully opened/closed.

This trigger fires when single press the specified switch.

This trigger fires when single press the specified switch.

The battery of the device is low

This trigger fires when When Bell ringing is detected

This trigger fires when Forcible demolition alarm detected

This trigger fires when recognize the specified face

This trigger fires when recognize strange faces

This trigger fires when somebody is lingering at your doorstep

This trigger fires when the cube flip to side 1

This trigger fires when the cube flip to side 2

This trigger fires when the cube flip to side 3

This trigger fires when the cube flip to side 4

This trigger fires when the cube flip to side 5

This trigger fires when the cube flip to side 6

This trigger fires when an event is detected in the zone

This trigger fires when the camera recognize the specified vehicle

This trigger fires when the S1E switch is clicked.

This trigger fires when presence detected.

This trigger fires when absence detected.

This trigger fires when when the camera detects pet.

This trigger fires when when the camera detects package.

This trigger fires when the camera detects detects unknown vehicle.

This trigger fires when when the camera detects human.

This query returns a list of when your WeMo Maker relay was turned on in momentary mode.

This query returns the current temperature.

This query returns a list of times a signal was not detected by an enabled sensor.

This query returns current humidity.

This query returns a list of times a signal was detected by an enabled sensor.

This query returns a list of when your WeMo Maker relay was turned off in toggle mode.

This query returns a list of when your WeMo Maker relay was turned on in toggle mode.

This action will wake up the specified camera.

This Action will turn your WeMo Maker on. If the WeMo Maker is already on, it will remain on.

This action will sleep the specified camera.

This Action will turn a WeMo Maker off. If the WeMo Maker is already off, it will remain off.

This action will wake up / sleep of the specified camera.

This Action will toggle a Wemo Maker if it is in toggle mode. If the relay is on, it will be turned off and vice versa.

This action will enable motion detection of the specified camera.

This Action will turn a Wemo Maker off then on. If the WeMo Maker is already off, it will remain off.

This action will enable sound detection of the specified camera.

This Action will turn a WeMo Maker on then off. If the WeMo Maker is already on, it will be turned off after 2 seconds.

This action will disable motion detection of the specified camera.

This Action will turn a WeMo Maker on for 300 milliseconds. Note: WeMo Maker must be in 'Momentary' mode for this action to work.

This action will disable sound detection of the specified camera.

This Action will turn a WeMo Maker on for 300 milliseconds as many times as you set. Note: The WeMo Maker must be in 'Momentary' mode for this Action to work.

This action will enable / disable motion detection of the specified camera.

This Action will turn relay on then off as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This action will enable / disable sound detection of the specified camera.

This Action will turn relay off then on as many times as you set. Note: The WeMo Maker must be in 'Toggle' mode for this Action to work.

This action will turn on/off the plug of your choosing.

This action will turn on/off the single rocker switches of your choosing.

This action will turn on/off the double rocker switches of your choosing.

This action will turn on/off the triple rocker switches of your choosing.

This action will turn on/off the wireless relay controller of your choosing.

This action will turn on/off the light of your choosing.

This action will open the curtain of your choosing.

This action will close the curtain of your choosing.

This action will open/close the curtain of your choosing.

This action will stop the curtain of your choosing.

This action will open the curtain of your choosing to the designated position.

This action will make feeder feed once

This action will Set the light of brightness

This action will set the color temperature of lamp

This action will set the color of the light

This action will Turn on/off the light of your choosing.

This action will run the light scenario