Connect Huma-i to GraspIO and unlock powerful automations

This Trigger fires if the concentration of Carbon Dioxide (CO₂) measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This trigger fires when the Analog Sensor value matches the specified condition.

This Trigger fires if VOC (Volatile Organic Compounds) level measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This trigger fires when the Digital Sensor value matches the specified condition.

This Trigger fires if the level of PM2.5 concentration measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This trigger fires when your Huma-i device data update.

This Trigger fires if the AQI measured from your Huma-i device rises above the specified threshold, which is the average for 5 minutes.

This Trigger fires when the temperature measured from your Huma-i device rises above the threshold you specified.

This Trigger fires when the temperature measured from your Huma-i drops below the threshold you specified.

This Trigger fires when the humidity measured from your Huma-i device rises above the threshold you specified.

This Trigger fires when the humidity measured from your Huma-i device dropped below the specified threshold, which is the average for 5 minutes.

This action will run a project saved in your GraspIO Studio account.

This action will display text on the OLED.

This action will turn on the RGB LED with the selected color.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will make the board speak using the interfaced Speaker.

This action will capture a photo or GIF using the interfaced camera.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.