Turn off the AC when you leave home
Other popular C&H Remote AC workflows and automations
-
-
-
Turn off the AC when the last group member leaves
-
-
Turn off AC when Tempest Weather Station temperature drops below X
-
-
Turn on the AC when you arrive home
-
-
Turn off AC when the sun sets
-
-
When the outdoor temperature rises above X, turn on C&H AC
-
-
When the outdoor temperature drops below X, turn off C&H AC
-
-
Turn on AC when your door is unlocked
-
-
Set AC to Eco Mode at 9 PM Daily
-
Build your own C&H Remote AC and Genius Hub automations
Triggers (If this)
-
Zone temperature exceeds a threshold
This trigger fires every time the zone temperature exceeds a threshold. Only zones which display a measured temperature on the app can be selected.
-
Zone temperature falls below a threshold
This trigger fires every time the zone temperature drops below a threshold. Only zones which display a measured temperature on the app can be selected.
-
Zone is being occupied
This trigger fires every time occupancy is detected in a zone. Only zones with a Room Sensor assigned can be selected.
-
Zone is being heated
The Trigger fires every time the zone heating turns on.
-
An assigned device has a low battery
This trigger fires every time an assigned device on your system gets a low battery.
Zone temperature exceeds a threshold
This trigger fires every time the zone temperature exceeds a threshold. Only zones which display a measured temperature on the app can be selected.
Zone temperature falls below a threshold
This trigger fires every time the zone temperature drops below a threshold. Only zones which display a measured temperature on the app can be selected.
Zone is being occupied
This trigger fires every time occupancy is detected in a zone. Only zones with a Room Sensor assigned can be selected.
Zone is being heated
The Trigger fires every time the zone heating turns on.
An assigned device has a low battery
This trigger fires every time an assigned device on your system gets a low battery.
Queries (With)
-
History of the zone temperature falling below a threshold
This query returns a recent list of when the zone temperature fell below a certain threshold. Only zones that display a measured temperature on the app can be selected. Note: this query will only return future events after this Applet is created.
-
History of Zone being occupied
This query returns a list of when occupancy was detected in a zone. Only zones with a Room Sensor assigned can be selected.
-
History of when a device has a low battery
This query returns a list of when an assigned device on your system had a low battery.
History of the zone temperature falling below a threshold
This query returns a recent list of when the zone temperature fell below a certain threshold. Only zones that display a measured temperature on the app can be selected. Note: this query will only return future events after this Applet is created.
History of Zone being occupied
This query returns a list of when occupancy was detected in a zone. Only zones with a Room Sensor assigned can be selected.
History of when a device has a low battery
This query returns a list of when an assigned device on your system had a low battery.
Actions (Then that)
-
Turn on/off the air conditioner
This ACTION will turn on/off the air conditioner.
-
Override a 'radiator' zone
Override a zone's temperature for a given duration.
-
Set operating mode
This ACTION will set the air conditioner to the designated operating mode.
-
Override an 'on / off' zone
Override a zone to 'on' or 'off' for a given duration.
-
Set Fan speed
This ACTION sets the fan to the desired speed (Auto,Low, Medium, High).
-
Override a 'hot water' zone
Override a zone's temperature for a given duration.
-
Set Temperature
This ACTION will change the air conditioner temperature setpoint.
-
Override a 'underfloor' zone
Override a zone's temperature for a given duration.
-
Turn on/off windSwingUD
This ACTION will turn on or off the up and down wind of the air conditioner
-
Turn on/off windSwingLR
This ACTION will turn on/off the left/right wind of the air conditioner
-
Turn on/off the ECO mode
This ACTION will turn on/off the ECO mode
Turn on/off the air conditioner
This ACTION will turn on/off the air conditioner.
Override a 'radiator' zone
Override a zone's temperature for a given duration.
Set operating mode
This ACTION will set the air conditioner to the designated operating mode.
Override an 'on / off' zone
Override a zone to 'on' or 'off' for a given duration.
Set Fan speed
This ACTION sets the fan to the desired speed (Auto,Low, Medium, High).
Override a 'hot water' zone
Override a zone's temperature for a given duration.
Set Temperature
This ACTION will change the air conditioner temperature setpoint.
Override a 'underfloor' zone
Override a zone's temperature for a given duration.
Turn on/off windSwingUD
This ACTION will turn on or off the up and down wind of the air conditioner
Turn on/off windSwingLR
This ACTION will turn on/off the left/right wind of the air conditioner
Turn on/off the ECO mode
This ACTION will turn on/off the ECO mode
How to connect C&H Remote AC and Genius Hub
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your C&H Remote AC and Genius Hub accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together