Turn on AC when your door is unlocked
Other popular C&H Remote AC workflows and automations
-
-
-
Turn on the AC when you arrive home
-
-
When the outdoor temperature drops below X, turn off C&H AC
-
-
Turn off the AC when the last group member leaves
-
-
Turn on C&H AC when Ecobee indoor temperature rises above X
-
-
When the outdoor temperature rises above X, turn on C&H AC
-
-
Turn off the AC when you leave home
-
-
Turn off AC when Tempest Weather Station temperature drops below X
-
-
Turn on the AC when the first group member arrives
-
Build your own C&H Remote AC and Mitsubishi Electric kumo cloud automations
Triggers (If this)
-
Temperature too high
This trigger fires when a Mitsubishi Electric zone reports a room temperature above a specific threshold.
-
Temperature too low
This trigger fires when a Mitsubishi Electric zone reports a room temperature below a specified threshold.
-
Zone turned on
This trigger fires when a Mitsubishi Electric zone turns on.
-
Zone turned off
This trigger fires when a Mitsubishi Electric zone turns off.
-
Mode changed
This trigger fires when a Mitsubishi Electric zone changes mode.
Temperature too high
This trigger fires when a Mitsubishi Electric zone reports a room temperature above a specific threshold.
Temperature too low
This trigger fires when a Mitsubishi Electric zone reports a room temperature below a specified threshold.
Zone turned on
This trigger fires when a Mitsubishi Electric zone turns on.
Zone turned off
This trigger fires when a Mitsubishi Electric zone turns off.
Mode changed
This trigger fires when a Mitsubishi Electric zone changes mode.
Queries (With)
Actions (Then that)
-
Turn on/off the air conditioner
This ACTION will turn on/off the air conditioner.
-
Turn on
This action will turn on a Mitsubishi Electric zone and optionally change the mode.
-
Set operating mode
This ACTION will set the air conditioner to the designated operating mode.
-
Turn off
This action will turn off a Mitsubishi Electric zone.
-
Set Fan speed
This ACTION sets the fan to the desired speed (Auto,Low, Medium, High).
-
Lower temperature
This action will lower the target temperature of a Mitsubishi Electric zone.
-
Set Temperature
This ACTION will change the air conditioner temperature setpoint.
-
Raise temperature
This action will raise the target temperature of a Mitsubishi Electric zone.
-
Turn on/off windSwingUD
This ACTION will turn on or off the up and down wind of the air conditioner
-
Turn on/off windSwingLR
This ACTION will turn on/off the left/right wind of the air conditioner
-
Turn on/off the ECO mode
This ACTION will turn on/off the ECO mode
Turn on/off the air conditioner
This ACTION will turn on/off the air conditioner.
Turn on
This action will turn on a Mitsubishi Electric zone and optionally change the mode.
Set operating mode
This ACTION will set the air conditioner to the designated operating mode.
Turn off
This action will turn off a Mitsubishi Electric zone.
Set Fan speed
This ACTION sets the fan to the desired speed (Auto,Low, Medium, High).
Lower temperature
This action will lower the target temperature of a Mitsubishi Electric zone.
Set Temperature
This ACTION will change the air conditioner temperature setpoint.
Raise temperature
This action will raise the target temperature of a Mitsubishi Electric zone.
Turn on/off windSwingUD
This ACTION will turn on or off the up and down wind of the air conditioner
Turn on/off windSwingLR
This ACTION will turn on/off the left/right wind of the air conditioner
Turn on/off the ECO mode
This ACTION will turn on/off the ECO mode
How to connect C&H Remote AC and Mitsubishi Electric kumo cloud
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your C&H Remote AC and Mitsubishi Electric kumo cloud accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together