Turn on Midea Fan when radon rises above threshold
Other popular Ecosense workflows and automations
-
-
-
Turn off Midea Fan when radon drops below threshold
-
-
Turn on WeMo Smart Plug when radon rises above threshold
-
-
Set Philips Hue lights to red when radon levels are high
-
-
Turn on Midea Air Purifier when radon rises above threshold
-
-
Send an SMS alert when radon levels rise above threshold
1
-
-
Turn off WeMo Smart Plug when radon drops below threshold
-
-
Log high radon levels to a spreadsheet
1
-
-
Turn off Midea Air Purifier when radon falls below threshold
-
Build your own Ecosense and go-e Charger automations
Triggers (If this)
-
Charging Started
This trigger fires when charging has started.
-
Radon level exceeds threshold
This trigger fires when the measured radon level surpasses the threshold
-
Car connected
This trigger fires when the car is plugged in.
-
Radon level drops below threshold
This trigger fires when the measured radon level drops below the threshold
-
Error
This trigger fires when an Error occurs.
-
Charging End
This trigger fires when the charging process has finished.
-
Charging Paused
This trigger fires when charging is paused.
-
Model Status
This trigger fires when the model status changes.
-
Transaction
This trigger fires when a transaction happened.
Charging Started
This trigger fires when charging has started.
Radon level exceeds threshold
This trigger fires when the measured radon level surpasses the threshold
Car connected
This trigger fires when the car is plugged in.
Radon level drops below threshold
This trigger fires when the measured radon level drops below the threshold
Error
This trigger fires when an Error occurs.
Charging End
This trigger fires when the charging process has finished.
Charging Paused
This trigger fires when charging is paused.
Model Status
This trigger fires when the model status changes.
Transaction
This trigger fires when a transaction happened.
Queries (With)
-
Get power from battery
This query returns the amount of power from your battery.
-
List all devices
This query returns a list of all devices
-
Currently connected WiFi ssid
This query returns the ssid of the currently connected WiFi.
-
Get Friendly Name
This query returns the friendly name of the charger.
-
Get Variant
This query returns the variant of the charger.
-
Get Mode
This query returns the current charger mode.
-
Grid Frequency
This query returns the grid frequency.
-
Get automatic stop energy
This query returns the automatic stop energy limit.
-
Get flexible energy tariff price limit
This query returns the flexible energy tariff price limit.
-
Get Transaction
This query returns the current card id.
-
Total energy
This query returns the total energy charged since purchase.
-
Get temperature
This query returns the temperature of the connector (type 2) and power supply.
-
Adapter connected
This query returns true if an current limiting adapter (i.e. 16A) is used.
-
Load Balancing Ampere
This query returns the load balancing amperes.
-
Get force state
This query returns the force state.
-
Get Energy Limit
This query returns the energy limit for the current charging session.
-
Current IP Address
This query returns the IP address of the charger.
-
Firmware Version
This query returns the firmware version.
-
Get energy Array
This query returns the energy array.
-
Get colors
This query returns the colors for Idle, Charging and Done.
-
Get cable current limit
This query returns the cable current limit.
-
Model Status
This query returns the current model status.
-
Get effective charging current
This query returns the effective charging current.
-
Get power from pv
This query returns the amount of power delivered by your pv.
-
Get unlock mode
This query returns the current unlock mode.
-
Get Requested Current
This query returns the requested current.
-
Get WiFi information
This query returns information about a connected WiFi.
-
Car State
This query returns the car state (Unknown, Idle, Wait for Car, Charging, Finished or Error).
-
Get access control
This query returns the current state of access control setting.
-
Ledring Brightness
This query returns the led-ring brightness
-
Charging Allowed
This query returns true/false, depending on if the car is allowed to charge right now.
-
Get power from powergrid
This query returns the amount of power delivered by the power grid.
-
Get led energy save mode
This query returns the led energy save mode.
Get power from battery
This query returns the amount of power from your battery.
List all devices
This query returns a list of all devices
Currently connected WiFi ssid
This query returns the ssid of the currently connected WiFi.
Get Friendly Name
This query returns the friendly name of the charger.
Get Variant
This query returns the variant of the charger.
Get Mode
This query returns the current charger mode.
Grid Frequency
This query returns the grid frequency.
Get automatic stop energy
This query returns the automatic stop energy limit.
Get flexible energy tariff price limit
This query returns the flexible energy tariff price limit.
Get Transaction
This query returns the current card id.
Total energy
This query returns the total energy charged since purchase.
Get temperature
This query returns the temperature of the connector (type 2) and power supply.
Adapter connected
This query returns true if an current limiting adapter (i.e. 16A) is used.
Load Balancing Ampere
This query returns the load balancing amperes.
Get force state
This query returns the force state.
Get Energy Limit
This query returns the energy limit for the current charging session.
Current IP Address
This query returns the IP address of the charger.
Firmware Version
This query returns the firmware version.
Get energy Array
This query returns the energy array.
Get colors
This query returns the colors for Idle, Charging and Done.
Get cable current limit
This query returns the cable current limit.
Model Status
This query returns the current model status.
Get effective charging current
This query returns the effective charging current.
Get power from pv
This query returns the amount of power delivered by your pv.
Get unlock mode
This query returns the current unlock mode.
Get Requested Current
This query returns the requested current.
Get WiFi information
This query returns information about a connected WiFi.
Car State
This query returns the car state (Unknown, Idle, Wait for Car, Charging, Finished or Error).
Get access control
This query returns the current state of access control setting.
Ledring Brightness
This query returns the led-ring brightness
Charging Allowed
This query returns true/false, depending on if the car is allowed to charge right now.
Get power from powergrid
This query returns the amount of power delivered by the power grid.
Get led energy save mode
This query returns the led energy save mode.
Actions (Then that)
-
Set Requested Current
This action will set the charging current.
-
Pause charging
This action will pause the charging process.
-
Start charging
This action will start the charging process.
-
Set charging state
This action will set the charging state to Neutral, Force-Off or Force-On.
-
Reboot Charger
This action will reboot the charger.
-
Set Energy Limit
This action will set the energy limit for the current charging session.
-
Set Mode
This action will set the mode of the charger.
-
Set ledring brightness
This action will set the ledring brightness.
-
Set Friendly Name
This action will set the friendly name.
-
Set colors
This action will set the colors for Idle, Charging and Done.
-
Set unlock mode
This action will set the unlock mode.
-
Set access control
This action will set the access control setting.
-
Set transaction
This action will set the transaction setting.
-
Set energy save mode
This action will set the led energy save mode.
-
Set flexible energy tariff price limit
This action will set the flexible energy tariff price limit.
-
Set automatic stop energy
This action will set the automatic stop energy.
Set Requested Current
This action will set the charging current.
Pause charging
This action will pause the charging process.
Start charging
This action will start the charging process.
Set charging state
This action will set the charging state to Neutral, Force-Off or Force-On.
Reboot Charger
This action will reboot the charger.
Set Energy Limit
This action will set the energy limit for the current charging session.
Set Mode
This action will set the mode of the charger.
Set ledring brightness
This action will set the ledring brightness.
Set Friendly Name
This action will set the friendly name.
Set colors
This action will set the colors for Idle, Charging and Done.
Set unlock mode
This action will set the unlock mode.
Set access control
This action will set the access control setting.
Set transaction
This action will set the transaction setting.
Set energy save mode
This action will set the led energy save mode.
Set flexible energy tariff price limit
This action will set the flexible energy tariff price limit.
Set automatic stop energy
This action will set the automatic stop energy.
How to connect Ecosense and go-e Charger
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Ecosense and go-e Charger accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together