Add high radon level events to your calendar
Other popular Ecosense workflows and automations
-
-
-
Send an email alert when radon levels reach your threshold
3
-
-
Turn on WeMo Smart Plug when radon rises above threshold
-
-
Turn on Midea Fan when radon rises above threshold
-
-
Turn off Midea Fan when radon drops below threshold
-
-
Log high radon levels to a spreadsheet
1
-
-
Send an SMS alert when radon levels rise above threshold
1
-
-
Turn off WeMo Smart Plug when radon drops below threshold
-
-
Set Philips Hue lights to red when radon levels are high
-
Build your own Ecosense and GraspIO automations
Triggers (If this)
-
Trigger when Analog Sensor fires
This trigger fires when the Analog Sensor value matches the specified condition.
-
Radon level exceeds threshold
This trigger fires when the measured radon level surpasses the threshold
-
Trigger when Digital Sensor fires
This trigger fires when the Digital Sensor value matches the specified condition.
-
Radon level drops below threshold
This trigger fires when the measured radon level drops below the threshold
Trigger when Analog Sensor fires
This trigger fires when the Analog Sensor value matches the specified condition.
Radon level exceeds threshold
This trigger fires when the measured radon level surpasses the threshold
Trigger when Digital Sensor fires
This trigger fires when the Digital Sensor value matches the specified condition.
Radon level drops below threshold
This trigger fires when the measured radon level drops below the threshold
Queries (With)
Actions (Then that)
-
Run a project
This action will run a project saved in your GraspIO Studio account.
-
Display text on OLED screen
This action will display text on the OLED.
-
Control RGB LED
This action will turn on the RGB LED with the selected color.
-
Flash RGB LED
This action will alternately display two colors for the selected duration/delay on the LED .
-
Speak the entered text
This action will make the board speak using the interfaced Speaker.
-
Capture a photo or GIF
This action will capture a photo or GIF using the interfaced camera.
-
Control Servo Motor
This action will control the Servo Motor angle and speed.
-
Control Digital Output ports
This action will control the Digital Output ports on the board.
-
Beep Buzzer
This action will beep the buzzer by turning it on and off at the desired frequency.
Run a project
This action will run a project saved in your GraspIO Studio account.
Display text on OLED screen
This action will display text on the OLED.
Control RGB LED
This action will turn on the RGB LED with the selected color.
Flash RGB LED
This action will alternately display two colors for the selected duration/delay on the LED .
Speak the entered text
This action will make the board speak using the interfaced Speaker.
Capture a photo or GIF
This action will capture a photo or GIF using the interfaced camera.
Control Servo Motor
This action will control the Servo Motor angle and speed.
Control Digital Output ports
This action will control the Digital Output ports on the board.
Beep Buzzer
This action will beep the buzzer by turning it on and off at the desired frequency.
How to connect Ecosense and GraspIO
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Ecosense and GraspIO accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together