This trigger fires every time the zone temperature exceeds a threshold. Only zones which display a measured temperature on the app can be selected.

This trigger fires every time the zone temperature drops below a threshold. Only zones which display a measured temperature on the app can be selected.

This trigger fires every time occupancy is detected in a zone. Only zones with a Room Sensor assigned can be selected.

The Trigger fires every time the zone heating turns on.

This trigger fires every time an assigned device on your system gets a low battery.

This query returns area names, light levels, and types for all exposed areas for a specified serial number. Exposed areas are those with a numerical Display Order provided in the PMMI config file spreadsheet. Areas will be returned in Display Order.

This query returns a recent list of when the zone temperature fell below a certain threshold. Only zones that display a measured temperature on the app can be selected. Note: this query will only return future events after this Applet is created.

This query returns valid scene names for a specified serial number.

This query returns a list of when occupancy was detected in a zone. Only zones with a Room Sensor assigned can be selected.

This query returns lighting controller system information for a specified serial number including system name, type, software version, and current home/away state.

This query returns a list of when an assigned device on your system had a low battery.

Override a zone's temperature for a given duration.

This action will toggle an area ON of OFF. All areas (dimmable, toggle only, and daylight harvesting) are applicable to this action.

Override a zone to 'on' or 'off' for a given duration.

This action will set a "dimmable" Area/Zone light level between 0 and 100% using a specified transition time.

Override a zone's temperature for a given duration.

This action will trigger a scene.

Override a zone's temperature for a given duration.