This trigger fires when a schedule is complete.

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the moisture value is calculated.

This trigger fires when the Digital Sensor value matches the specified condition.

This trigger fires when your Whisperer sensor reports measured data.

This trigger fires when a new event is generated.

This action will run a project saved in your GraspIO Studio account.

This action will enable or disable your Netro devices.

This action will display text on the OLED.

This action will water your yard for a period of time. You can specify one zone or all zones, watering duration and start time.

This action will turn on the RGB LED with the selected color.

This action will stop the watering schedules generated by the "water" action.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will prevent Netro devices from watering in the next few days.

This action will make the board speak using the interfaced Speaker.

This action will set the moisture level of a zone. It overrides the default moisture level provided by Netro cloud or Whisperer sensor.

This action will capture a photo or GIF using the interfaced camera.

provide your specific weather data to override Netro's default weather data

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.