When a digital sensor fires, open gate
Other popular GraspIO workflows and automations
-
-
-
When an analog sensor fires, open gate
-
-
Turn Cloudio's LED red when your Android device's battery drops below 15%
1
-
-
Get an email when GraspIO publishes a new trigger or action on IFTTT
6
-
-
Push a button to run a project of your choice on Cloudio
2
-
-
Display new Product Hunt posts on your OLED screen
-
-
Make Cloudio speak an audio message when you achieve your daily distance goal on Fitbit
1
-
-
When there's a new post on Product Hunt, flash lights green and buzz a buzzer
-
-
Read out the names of new products on Product Hunt
-
Build your own GraspIO and Powahome automations
Triggers (If this)
-
Light switched on
This trigger fires when the light you select is switched on.
-
Trigger when Analog Sensor fires
This trigger fires when the Analog Sensor value matches the specified condition.
-
Any light is switched on in a room
This trigger fires when a light is switched on in the room you select.
-
Trigger when Digital Sensor fires
This trigger fires when the Digital Sensor value matches the specified condition.
-
Light switched off
This trigger fires when the light you select is switched off.
-
Any light is switched off in a room
This trigger fires when a light is switched off in the room you select.
-
Socket switched on
This trigger fires when the socket you select is switched on.
-
Any socket is switched on in a room
This trigger fires when a socket is switched on in the room you select.
-
Socket switched off
This trigger fires when the socket you select is switched off.
-
Any socket is switched off in a room
This trigger fires when a socket is switched off in the room you select.
-
Roller moved
This trigger fires every time the roller you select is crossing the selected percentage.
-
Any roller is moved in a room
This trigger fires every time a roller is crossing the selected percentage in the room you select.
Light switched on
This trigger fires when the light you select is switched on.
Trigger when Analog Sensor fires
This trigger fires when the Analog Sensor value matches the specified condition.
Any light is switched on in a room
This trigger fires when a light is switched on in the room you select.
Trigger when Digital Sensor fires
This trigger fires when the Digital Sensor value matches the specified condition.
Light switched off
This trigger fires when the light you select is switched off.
Any light is switched off in a room
This trigger fires when a light is switched off in the room you select.
Socket switched on
This trigger fires when the socket you select is switched on.
Any socket is switched on in a room
This trigger fires when a socket is switched on in the room you select.
Socket switched off
This trigger fires when the socket you select is switched off.
Any socket is switched off in a room
This trigger fires when a socket is switched off in the room you select.
Roller moved
This trigger fires every time the roller you select is crossing the selected percentage.
Any roller is moved in a room
This trigger fires every time a roller is crossing the selected percentage in the room you select.
Queries (With)
-
History of light switched on
This query returns a list of when the light you select was switched on.
-
History of when a socket was switched off
This query returns a list of when a socket was switched off in the room you select.
-
History of roller moved in a room
This query returns a list of when a roller was crossed the selected threshold in the room you selected. Note: this query will only return future events after this Applet is created.
History of light switched on
This query returns a list of when the light you select was switched on.
History of when a socket was switched off
This query returns a list of when a socket was switched off in the room you select.
History of roller moved in a room
This query returns a list of when a roller was crossed the selected threshold in the room you selected. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Switch on light
This action will switch on the light you select.
-
Run a project
This action will run a project saved in your GraspIO Studio account.
-
Switch on all the lights in a room
This action will switch on all the lights in the room you select.
-
Display text on OLED screen
This action will display text on the OLED.
-
Switch on all the lights
This action will switch on all your lights.
-
Control RGB LED
This action will turn on the RGB LED with the selected color.
-
Switch off light
This action will switch off the light you select.
-
Flash RGB LED
This action will alternately display two colors for the selected duration/delay on the LED .
-
Switch off all the lights in a room
This action will switch off all the lights in the room you select.
-
Speak the entered text
This action will make the board speak using the interfaced Speaker.
-
Switch off all the lights
This action will switch off all your lights.
-
Capture a photo or GIF
This action will capture a photo or GIF using the interfaced camera.
-
Switch on socket
This action will switch on the socket you select.
-
Control Servo Motor
This action will control the Servo Motor angle and speed.
-
Switch on all the sockets in a room
This action will switch on all your sockets in the room you select.
-
Control Digital Output ports
This action will control the Digital Output ports on the board.
-
Switch on all the sockets
This action will switch on all your sockets.
-
Beep Buzzer
This action will beep the buzzer by turning it on and off at the desired frequency.
-
Switch off socket
This action will switch off the socket you select.
-
Switch off all the sockets in a room
This action will switch off all your sockets in the room you select.
-
Switch off all the sockets
This action will switch off all your sockets.
-
Move roller
This action will move the roller you select at the given opening percentage.
-
Move all the rollers in a room
This action will move all the rollers in the room you select.
-
Move all the rollers
This action will move all your rollers.
-
Invert light
This action will invert the state of the light you select.
-
Invert all the lights in a room
This action will invert all the lights in the room you select.
-
Invert all the lights
This action will invert all your lights.
-
Invert all the sockets in a room
This action will invert all your sockets in the room you select.
-
Invert socket
This action will invert the socket you select
-
Invert all the sockets
This action will invert all your sockets.
Switch on light
This action will switch on the light you select.
Run a project
This action will run a project saved in your GraspIO Studio account.
Switch on all the lights in a room
This action will switch on all the lights in the room you select.
Display text on OLED screen
This action will display text on the OLED.
Switch on all the lights
This action will switch on all your lights.
Control RGB LED
This action will turn on the RGB LED with the selected color.
Switch off light
This action will switch off the light you select.
Flash RGB LED
This action will alternately display two colors for the selected duration/delay on the LED .
Switch off all the lights in a room
This action will switch off all the lights in the room you select.
Speak the entered text
This action will make the board speak using the interfaced Speaker.
Switch off all the lights
This action will switch off all your lights.
Capture a photo or GIF
This action will capture a photo or GIF using the interfaced camera.
Switch on socket
This action will switch on the socket you select.
Control Servo Motor
This action will control the Servo Motor angle and speed.
Switch on all the sockets in a room
This action will switch on all your sockets in the room you select.
Control Digital Output ports
This action will control the Digital Output ports on the board.
Switch on all the sockets
This action will switch on all your sockets.
Beep Buzzer
This action will beep the buzzer by turning it on and off at the desired frequency.
Switch off socket
This action will switch off the socket you select.
Switch off all the sockets in a room
This action will switch off all your sockets in the room you select.
Switch off all the sockets
This action will switch off all your sockets.
Move roller
This action will move the roller you select at the given opening percentage.
Move all the rollers in a room
This action will move all the rollers in the room you select.
Move all the rollers
This action will move all your rollers.
Invert light
This action will invert the state of the light you select.
Invert all the lights in a room
This action will invert all the lights in the room you select.
Invert all the lights
This action will invert all your lights.
Invert all the sockets in a room
This action will invert all your sockets in the room you select.
Invert socket
This action will invert the socket you select
Invert all the sockets
This action will invert all your sockets.
How to connect GraspIO and Powahome
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your GraspIO and Powahome accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together