Get an email when GraspIO publishes a new trigger or action on IFTTT
Other popular GraspIO workflows and automations
-
3
-
-
Push a button to run a project of your choice on Cloudio
2
-
-
Display new Product Hunt posts on your OLED screen
-
-
Make Cloudio speak an audio message when you achieve your daily distance goal on Fitbit
-
-
When an analog trigger fires, turn on your heater
-
-
Turn Cloudio's LED red when your Android device's battery drops below 15%
1
-
-
When a digital sensor fires, open gate
-
-
Read out the names of new products on Product Hunt
-
-
When an analog sensor fires, open gate
-
Build your own GraspIO and Smappee automations
Triggers (If this)
-
Appliance turns on
This Trigger fires when the selected appliance is turned on.
-
Trigger when Analog Sensor fires
This trigger fires when the Analog Sensor value matches the specified condition.
-
Appliance turns off
This Trigger fires when the selected appliance is turned off.
-
Trigger when Digital Sensor fires
This trigger fires when the Digital Sensor value matches the specified condition.
-
Power rises above
This Trigger fires every time the power rises above the specified value in watts.
-
Power drops below
This Trigger fires every time the power drops below the specified value in watts.
-
Solar power rises above
This Trigger fires every time the solar power rises above the specified value in watts.
-
Solar power drops below
This trigger fires when the solar power drops below the specified value in watts.
Appliance turns on
This Trigger fires when the selected appliance is turned on.
Trigger when Analog Sensor fires
This trigger fires when the Analog Sensor value matches the specified condition.
Appliance turns off
This Trigger fires when the selected appliance is turned off.
Trigger when Digital Sensor fires
This trigger fires when the Digital Sensor value matches the specified condition.
Power rises above
This Trigger fires every time the power rises above the specified value in watts.
Power drops below
This Trigger fires every time the power drops below the specified value in watts.
Solar power rises above
This Trigger fires every time the solar power rises above the specified value in watts.
Solar power drops below
This trigger fires when the solar power drops below the specified value in watts.
Queries (With)
-
History of soloar power rises
This query returns a list of when the solar power has risen above the specified value in watts. Note: this query will only return future events after this Applet is created.
-
History of Power exceeded threshold
This query returns a list of times when the power rose above the specified value in watts. Note: this query will only return future events after this Applet is created.
-
History of when power dropped below a threshold
This query returns a list of when the power dropped below the specified value in watts. Note: this query will only return future events after this Applet is created.
History of soloar power rises
This query returns a list of when the solar power has risen above the specified value in watts. Note: this query will only return future events after this Applet is created.
History of Power exceeded threshold
This query returns a list of times when the power rose above the specified value in watts. Note: this query will only return future events after this Applet is created.
History of when power dropped below a threshold
This query returns a list of when the power dropped below the specified value in watts. Note: this query will only return future events after this Applet is created.
Actions (Then that)
-
Run a project
This action will run a project saved in your GraspIO Studio account.
-
Turn on plug
This Action will turn on a plug for the specified duration.
-
Display text on OLED screen
This action will display text on the OLED.
-
Turn off plug
This Action will turn off a plug for the specified duration.
-
Control RGB LED
This action will turn on the RGB LED with the selected color.
-
Flash RGB LED
This action will alternately display two colors for the selected duration/delay on the LED .
-
Speak the entered text
This action will make the board speak using the interfaced Speaker.
-
Capture a photo or GIF
This action will capture a photo or GIF using the interfaced camera.
-
Control Servo Motor
This action will control the Servo Motor angle and speed.
-
Control Digital Output ports
This action will control the Digital Output ports on the board.
-
Beep Buzzer
This action will beep the buzzer by turning it on and off at the desired frequency.
Run a project
This action will run a project saved in your GraspIO Studio account.
Turn on plug
This Action will turn on a plug for the specified duration.
Display text on OLED screen
This action will display text on the OLED.
Turn off plug
This Action will turn off a plug for the specified duration.
Control RGB LED
This action will turn on the RGB LED with the selected color.
Flash RGB LED
This action will alternately display two colors for the selected duration/delay on the LED .
Speak the entered text
This action will make the board speak using the interfaced Speaker.
Capture a photo or GIF
This action will capture a photo or GIF using the interfaced camera.
Control Servo Motor
This action will control the Servo Motor angle and speed.
Control Digital Output ports
This action will control the Digital Output ports on the board.
Beep Buzzer
This action will beep the buzzer by turning it on and off at the desired frequency.
How to connect GraspIO and Smappee
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your GraspIO and Smappee accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together