Connect GraspIO to Somfy Connected Thermostat and unlock powerful automations

This Trigger fires every time the thermostat you specify is set to a certain heating mode.

This trigger fires when the Analog Sensor value matches the specified condition.

This Trigger fires every time the temperature rises above a threshold you specify.

This trigger fires when the Digital Sensor value matches the specified condition.

This Trigger fires every time the temperature drops below a threshold you specify.

This Trigger fires every time your thermostat is nearly out of battery.

This query returns a list of when the temperature rises above a threshold you specify. Note: this query will only return future events after this Applet is created.

This query returns a list of when the thermostat you specify was set to a certain heating mode.

This action will run a project saved in your GraspIO Studio account.

This Action will set your thermostat to manual mode at a specified temperature for a specified duration.

This action will display text on the OLED.

This Action will set your thermostat to a certain mode.

This action will turn on the RGB LED with the selected color.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will make the board speak using the interfaced Speaker.

This action will capture a photo or GIF using the interfaced camera.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.