Connect GraspIO to Philips Hue and unlock powerful automations

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the Digital Sensor value matches the specified condition.

This query returns all lights of the bridge.

This Action well set a scene on your hue lights. NOTE: in order to add lights to a room, you must be using the newest version of the Hue app

This action will run a project saved in your GraspIO Studio account.

This Action will turn on your hue lights.

This action will display text on the OLED.

This Action will turn off your hue lights.

This action will turn on the RGB LED with the selected color.

This Action will toggle your hue lights on or off.

This action will alternately display two colors for the selected duration/delay on the LED .

This Action will briefly turn your hue lights off then back on.

This action will make the board speak using the interfaced Speaker.

This Action will dim or brighten your hue lights to a value between 0-100.

This action will capture a photo or GIF using the interfaced camera.

This Action will change the color of your hue lights. NOTE: Accepts color names and CSS hex color values. Defaults to white if no color match is found. NOTE: not compatible with hue lux bulbs.

This action will control the Servo Motor angle and speed.

This Action will change your hue lights to a randomly selected color. NOTE: not compatible with hue lux bulbs.

This action will control the Digital Output ports on the board.

This Action will change the color of your hue lights to match the dominant colors found in an image you specify. NOTE: not compatible with hue lux bulbs.

This action will beep the buzzer by turning it on and off at the desired frequency.

This Action will turn on a slow color loop effect for your hue lights. NOTE: not compatible with hue lux bulbs.