Connect GraspIO to Swann Security and unlock powerful automations

The trigger fires when the Swann Video Doorbell button is pressed.

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the selected Swann security device detects motion.

This trigger fires when the Digital Sensor value matches the specified condition.

This trigger fires when a person is detected on your Swann security device

This trigger fires when a pet is detected on the selected Swann security device.

This trigger fires when a sound is detected by the selected Swann security device.

This trigger fires when a vehicle is detected by the selected Swann security device.

This trigger is fired when a low battery is detected on the selected Swann wireless security device.

This trigger is fired when an enrolled or selected face is detected by the Swann security device.

This action will run a project saved in your GraspIO Studio account.

This action will display text on the OLED.

This action will turn on the RGB LED with the selected color.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will make the board speak using the interfaced Speaker.

This action will capture a photo or GIF using the interfaced camera.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.