Connect GraspIO to Swidget and unlock powerful automations

This trigger fires when the specified Swidget device turns on.

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the specified Swidget device turns off.

This trigger fires when the Digital Sensor value matches the specified condition.

The trigger fires when the temperature goes above a given threshold.

This trigger fires when the temperature goes below a given value.

This trigger fires when the humidity goes above a given value.

This trigger fires when the humidity goes below a given value.

The trigger fires when motion sensor detects occupancy.

The trigger fires when motion sensor reports vacancy.

This trigger fires when the air quality goes over a given value.

This trigger fires when the air quality goes below a given value.

This action will run a project saved in your GraspIO Studio account.

This action will turn your selected Swidget device on.

This action will display text on the OLED.

This action will turn your selected Swidget device Off.

This action will turn on the RGB LED with the selected color.

This action will set your Swidget dimmer device to the specified level.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will make the board speak using the interfaced Speaker.

This action will capture a photo or GIF using the interfaced camera.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.