Connect Aqara Home for US to UbiBot and unlock powerful automations

This trigger fires when the specified single rocker switch is turned on/off.

This trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.

This trigger fires when the specified double rocker switch is turned on/off.

This trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.

This trigger fires when the specified triple rocker switch is turned on/off.

This trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.

This trigger fires when the specified Relay Controller is turned on/off.

This trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.

This trigger fires when the specified light is turned on/off.

This trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.

This trigger fires when the specified plug is turned on/off.

This trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.

This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.

This trigger fires when your UbiBot device is offline.

This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.

This trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.

This trigger fires when the temperature reaches the specified value.

This trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).

This trigger fires when the temperature drops to the specified value.

This trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)

This trigger fires when the humidity reaches the specified value.

This trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This trigger fires when the humidity drops to the specified value.

This trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This trigger fires when the tvoc reaches the specified value.

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.

This trigger fires when the tvoc drops to the specified value.

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.

This trigger fires when the darkness is detected.

This trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.

This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.

This trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.

This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.

This trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.

This trigger fires when motion is detected.

This trigger fires when water leak is detected.

This trigger fires when the water recedes.

This trigger fires when the door and window sensor is open.

This trigger fires when the door and window sensor is closed.

This trigger fires when the motion is detected and brightness is below the specified value.

This trigger fires when the motion is detected and brightness is above the specified value.

This trigger fires when the cube is triggered after one-minute inactivity.

This trigger fires when the the cube was flipped

This trigger fires when the cube was pushed.

This trigger fires when the cube was rotated.

This trigger fires when the cube was tapped twice.

This trigger fires when the cube was shaken.

This trigger fires when the drop is detected.

This trigger fires when the tilt is detected.

This trigger fires when the vibration is detected.

This trigger fires when the specified curtain is fully opened/closed.

This trigger fires when single press the specified switch.

This trigger fires when single press the specified switch.

The battery of the device is low

This trigger fires when When Bell ringing is detected

This trigger fires when Forcible demolition alarm detected

This trigger fires when recognize the specified face

This trigger fires when recognize strange faces

This trigger fires when somebody is lingering at your doorstep

This trigger fires when the cube flip to side 1

This trigger fires when the cube flip to side 2

This trigger fires when the cube flip to side 3

This trigger fires when the cube flip to side 4

This trigger fires when the cube flip to side 5

This trigger fires when the cube flip to side 6

This trigger fires when an event is detected in the zone

This trigger fires when the camera recognize the specified vehicle

This trigger fires when the S1E switch is clicked.

This trigger fires when presence detected.

This trigger fires when absence detected.

This trigger fires when when the camera detects pet.

This trigger fires when when the camera detects package.

This trigger fires when the camera detects detects unknown vehicle.

This trigger fires when when the camera detects human.

This query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns the current temperature.

This query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.

This query returns current humidity.

This query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.

This action will wake up the specified camera.

Send Action Command to Any Target Channel

This action will sleep the specified camera.

Send Action RAW Command to Any Target Channel

This action will wake up / sleep of the specified camera.

Send Action Command to Turn On or Off your UbiBot Smart Plug

This action will enable motion detection of the specified camera.

Send Action Command to Turn On or Off your UbiBot Network Relay Switch

This action will enable sound detection of the specified camera.

This action will disable motion detection of the specified camera.

This action will disable sound detection of the specified camera.

This action will enable / disable motion detection of the specified camera.

This action will enable / disable sound detection of the specified camera.

This action will turn on/off the plug of your choosing.

This action will turn on/off the single rocker switches of your choosing.

This action will turn on/off the double rocker switches of your choosing.

This action will turn on/off the triple rocker switches of your choosing.

This action will turn on/off the wireless relay controller of your choosing.

This action will turn on/off the light of your choosing.

This action will open the curtain of your choosing.

This action will close the curtain of your choosing.

This action will open/close the curtain of your choosing.

This action will stop the curtain of your choosing.

This action will open the curtain of your choosing to the designated position.

This action will make feeder feed once

This action will Set the light of brightness

This action will set the color temperature of lamp

This action will set the color of the light

This action will Turn on/off the light of your choosing.

This action will run the light scenario