Quickly connect Midea Air Dehumidifier to GraspIO - IFTTT

Service not found

Useful Midea Air Dehumidifier and GraspIO integrations

Triggers (If this)

Trigger when Analog Sensor fires
This trigger fires when the Analog Sensor value matches the specified condition.
Trigger when Digital Sensor fires
This trigger fires when the Digital Sensor value matches the specified condition.

Actions (Then that)

Run a project
This action will run a project saved in your GraspIO Studio account.
Turn on/off the dehumidifier
This ACTION will turn on/off the dehumidifier.
Display text on OLED screen
This action will display text on the OLED.
Select the Humidity setpoint
This ACTION sets the dehumidifier to a designated humidity level between 35-85%.
Control RGB LED
This action will turn on the RGB LED with the selected color.
Set operating mode
This ACTION will set the dehumidifier to the designated operating mode.
Flash RGB LED
This action will alternately display two colors for the selected duration/delay on the LED .
Speak the entered text
This action will make the board speak using the interfaced Speaker.
Capture a photo or GIF
This action will capture a photo or GIF using the interfaced camera.
Control Servo Motor
This action will control the Servo Motor angle and speed.
Control Digital Output ports
This action will control the Digital Output ports on the board.
Beep Buzzer
This action will beep the buzzer by turning it on and off at the desired frequency.

IFTTT helps all your apps and devices work better together