Log high CO₂ levels in Google Sheets
Start today
Other popular Epion workflows and automations
- Turn on your Hue connected ventilator when the CO₂ level rises above a certain level
- Turn on your FIBARO connected ventilator when the CO₂ level rises above a certain level
- Change light color when measured CO₂ rises above 1000 ppm
- Change device brightness on a schedule
- Launch Connexoon mode when Epion Air measures a high temperature
- Turn off your FIBARO connected ventilator when the CO₂ level dips above a certain level
- Play alert on Spotify when the CO₂ level is very high
- Automatically run WeMo humidifier when humidity is low
Useful Epion and UbiBot integrations
Triggers (If this)
- Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.
- CO₂ above a specified valueThis trigger fires when the CO₂ level for a specific devices exceeded a specified threshold.
- (Universal) Any Channel Field Value Rises above or Drops belowThis trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.
- CO₂ below a specified valueThis trigger fires when the CO₂ level for a specific devices becomes lower than the specified threshold.
- Humidity Rises above or Drops belowThis trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.
- Temperature above a specified valueThis trigger fires when the temperature for a specific device exceeds the specified threshold.
- Light Rises above or Drops belowThis trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.
- Temperature below a specified valueThis trigger fires when the temperature for a specific device becomes lower than the specified threshold.
- Voltage Rises above or Drops belowThis trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.
- Humidity below a specified valueThis trigger fires when the humidity for a specific device becomes lower than the specified threshold.
- External Power Supply is Up or DownThis trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.
- Humidity above a specified valueThis trigger fires when the humidity for a specific device becomes higher than the specified threshold.
- Device is offlineThis trigger fires when your UbiBot device is offline.
- Motion is Detected or Undetected from Motion SensorThis trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.
- External-DS18B20-Temperature-Probe-1 Rises above or Drops belowThis trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).
- External-DS18B20-Temperature-Probe-2 Rises above or Drops belowThis trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)
- External-TH30S-Probe-Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
- External-TH30S-Probe-Humidity Rises above or Drops belowThis trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).
- External-Soil-Probe-Moisture Rises above or Drops belowThis trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.
- External-Soil-Probe-Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.
- External-PT100-Probe Temperature Rises above or Drops belowThis trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.
- Vibration Index Rises above or Drops belowThis trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.
- Carbon Dioxide (CO2) Rises above or Drops belowThis trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.
Queries (With)
- History of vibration index rises above or drops below thresholdThis query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
- Retrieve latest measurementsThis query returns the latest measurements of the selected Epion Air.
- History of light crossed a thresholdThis query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.
- List all Epion AirThis query returns all your Epion Air devices.
- History of External-Soil-Probe-Moisture Rises above or drops belowThis query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.
- History of Sensor Data ReceivedThis query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.
Actions (Then that)
- (Universal) Send Command to Any ChannelSend Action Command to Any Target Channel
- Set brightnessThis action will update the LED brightness for a specific device
- (Universal) Send RAW Command to Any ChannelSend Action RAW Command to Any Target Channel
- Turn On or Off your UbiBot Smart PlugSend Action Command to Turn On or Off your UbiBot Smart Plug
- Turn On or Off your Network Relay SwitchSend Action Command to Turn On or Off your UbiBot Network Relay Switch
IFTTT helps all your apps and devices work better together