Connect GraspIO to Lennox iComfort and unlock powerful automations

This Trigger fires every time the indoor temperature rises above a threshold that is specified.

This trigger fires when the Analog Sensor value matches the specified condition.

This Trigger fires when my thermostat enters Away mode.

This trigger fires when the Digital Sensor value matches the specified condition.

This Trigger fires when Away mode is canceled on my thermostat.

This Trigger fires every time the indoor temperature drops below a threshold that is specified.

This query returns a list of when the indoor temperature rose above a threshold that was specified. Note: this query will only return future events after this Applet is created.

This query returns a list of when my thermostat entered Away mode.

This query returns a list of instances when the indoor temperature drops below a threshold that was specified. Note: this query will only return future events after this Applet is created.

This action will run a project saved in your GraspIO Studio account.

This Action will set my thermostat's fan to On indefinitely. Note: does not work when the thermostat is in Away mode.

This action will display text on the OLED.

This Action will set my thermostat's fan to AUTO indefinitely. Note: does not work when the thermostat is in Away mode.

This action will turn on the RGB LED with the selected color.

This Action will set my thermostat's fan to CIRCULATE indefinitely. Note: does not work when the thermostat is in Away mode.

This action will alternately display two colors for the selected duration/delay on the LED .

This Action will set the Thermostat to Off.

This action will make the board speak using the interfaced Speaker.

This Action will set all Thermostats in a home to Away.

This action will capture a photo or GIF using the interfaced camera.

This Action will cancel Away on Thermostats in a home.

This action will control the Servo Motor angle and speed.

This Action will attempt to increase the indoor temperature of an thermostat by the number of degrees specified.

This action will control the Digital Output ports on the board.

This Action will attempt to decrease the indoor temperature of an thermostat by the number of degrees specified.

This action will beep the buzzer by turning it on and off at the desired frequency.