This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the Digital Sensor value matches the specified condition.

This action will turn off the projector attached to the LF device, if supported.

This action will run a project saved in your GraspIO Studio account.

This action will turn on the projector attached to the LF device, if supported.

This action will display text on the OLED.

This action will pause a currently playing project.

This action will turn on the RGB LED with the selected color.

This action will stop a currently playing project and return to the testcard.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will advance to the next slide in the project, or go to the first slide if the final slide is currently playing.

This action will make the board speak using the interfaced Speaker.

This action will update a slide parameter value

This action will capture a photo or GIF using the interfaced camera.

This action will go to the to the previous slide in the project, or go to the last slide if the first slide is currently playing.

This action will control the Servo Motor angle and speed.

This action will reboot the device.

This action will control the Digital Output ports on the board.

This action will resume a currently playing project.

This action will beep the buzzer by turning it on and off at the desired frequency.

This action will start playing the slide at the given index

This action will change the global brightness of the projection