Connect GraspIO to LUXORliving and unlock powerful automations

This trigger fires when the selected switch is activated.

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the selected blind is activated.

This trigger fires when the Digital Sensor value matches the specified condition.

This trigger fires when the selected dimmer is activated.

This trigger fires when the selected scene trigger is activated.

This Trigger fires every time the temperature drops below a value you specify.

This Trigger fires every time your Theben LX Weatherstation detects no wind alarm.

This Trigger fires every time your Theben LX Weatherstation detects wind alarm.

This Trigger fires every time your Theben LX Weatherstation detects that it is not raining.

This Trigger fires every time your Theben LX Weatherstation detects no frost alarm.

This Trigger fires every time your Theben LX Weatherstation detects frost alarm.

This Trigger fires every time your Theben LX Weatherstation detects that it is raining.

This Trigger fires every time the temperature rises above a value you specify.

This action will run a project saved in your GraspIO Studio account.

This action will switch the state of a device.

This action will display text on the OLED.

This action will change the brightness of the specified device.

This action will turn on the RGB LED with the selected color.

This action will change the position of your selected shading device

This action will alternately display two colors for the selected duration/delay on the LED .

This action will call a scene.

This action will make the board speak using the interfaced Speaker.

This action will capture a photo or GIF using the interfaced camera.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.