Connect GraspIO to Orro and unlock powerful automations

This trigger fires when the lights turn on.

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the lights turn off.

This trigger fires when the Digital Sensor value matches the specified condition.

This trigger fires when the Switch (or Group) changes to present.

This trigger fires when the Switch (or Group) changes to a vacant.

This trigger fires when Away Mode is enabled.

This trigger fires when Away Mode is disabled.

This trigger fires when a scene is activated.

This trigger fires when a scene is deactivated.

This action will run a project saved in your GraspIO Studio account.

This action will turn the specified switch or group of switches on.

This action will display text on the OLED.

This action will turn the specified switch or group of switches off.

This action will turn on the RGB LED with the selected color.

This action will set the dimmer for the specified switch or group of switches.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will ENABLE Away Mode for your Orro Home.

This action will make the board speak using the interfaced Speaker.

This action will DISABLE Away Mode for your Orro Home.

This action will capture a photo or GIF using the interfaced camera.

This action will turn ON all switches.

This action will control the Servo Motor angle and speed.

This action will turn OFF all switches.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.