Connect GraspIO to PMMI Lighting and unlock powerful automations

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the Digital Sensor value matches the specified condition.

This query returns area names, light levels, and types for all exposed areas for a specified serial number. Exposed areas are those with a numerical Display Order provided in the PMMI config file spreadsheet. Areas will be returned in Display Order.

This query returns valid scene names for a specified serial number.

This query returns lighting controller system information for a specified serial number including system name, type, software version, and current home/away state.

This action will run a project saved in your GraspIO Studio account.

This action will toggle an area ON of OFF. All areas (dimmable, toggle only, and daylight harvesting) are applicable to this action.

This action will display text on the OLED.

This action will set a "dimmable" Area/Zone light level between 0 and 100% using a specified transition time.

This action will turn on the RGB LED with the selected color.

This action will trigger a scene.

This action will alternately display two colors for the selected duration/delay on the LED .

This action will make the board speak using the interfaced Speaker.

This action will capture a photo or GIF using the interfaced camera.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.