Arm at sunset
Start today
Popular Weather Underground and Wireless Tag workflows and automations
Useful Weather Underground and Wireless Tag integrations
Triggers (If this)
- Tag is movedThis Trigger fires when specified motion sensor tag(s) armed in motion detection mode, have moved.
- Today's weather reportThis Trigger retrieves today's current weather report within 5 minutes of the time you specify. NOTE: Pollen count available only in the USA.
- Door or window is openedThis Trigger fires when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window is open.
- Tomorrow's weather reportThis Trigger retrieves tomorrow's weather report within 5 minutes of the time you specify, depending on when forecast data is updated.
- Door or window is closedThis Trigger fires when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window is closed.
- Current temperature drops belowThis Trigger monitors your local temperature and fires whenever the temperature drops below the value you provide.
- Movement is detectedThis Trigger fires when specified PIR KumoSensor detects movement.
- Current temperature rises aboveThis Trigger monitors your local temperature and fires whenever the temperature rises above the value you provide.
- Motion sensor has timed outThis Trigger fires when specified PIR KumoSensor or regular motion sensor tag detects no movement for a time-out period.
- Current condition changes toThis Trigger monitors changes in the current weather condition. When one of those conditions is met the Trigger fires. Currently only these simple conditions are supported: Rain, Snow, Cloudy, Clear.
- Temperature is too highThis Trigger fires when a specified tag senses that its ambient temperature exceeds an upper threshold configured at temperature options screen inside the WirelessTag app.
- Tomorrow's low drops belowThis Trigger fires every time tomorrow’s forecasted low temperature drops below a value you provide.
- Temperature is too lowThis Trigger fires when a specified tag senses that its ambient temperature falls below an lower threshold configured at temperature options screen inside the WirelessTag app.
- Tomorrow's high rises aboveThis Trigger fires every time tomorrow’s forecasted high temperature rises above a value you provide.
- Temperature returns to normalThis Trigger fires when a specified tag senses that its ambient temperature returns between the upper and lower thresholds configured at temperature options screen inside the WirelessTag app.
- Tomorrow's forecast calls forThis Trigger monitors changes in tomorrow’s forecasted weather condition.
- Humidity or moisture is too highThis Trigger fires when a specified tag with humidity or moisture monitoring enabled, detects "too wet" state. Adjust the threshold from the humidity/moisture options screen inside the WirelessTag app.
- SunriseThis Trigger fires within 15 minutes of the sunrise in your location.
- Humidity or moisture is too lowThis Trigger fires when a specified tag with humidity or moisture monitoring enabled, detects "too dry" state. Adjust the threshold from the humidity/moisture options screen inside the WirelessTag app.
- SunsetThis Trigger fires within 15 minutes of the sunset in your location.
- Humidity or moisture returns to normalThis Trigger fires when a specified tag with humidity or moisture monitoring enabled, returns within normal humidity range. Adjust the upper/lower thresholds from the humidity/moisture options screen inside the WirelessTag app.
- Wind speed rises aboveThis Trigger fires every time the wind speed rises above a value you specify in your location.
- Sensor detects waterThis Trigger fires when specified water sensor tag detects water with its resistive sensor, or when you short circuit its tip.
- Current pollen count rises aboveThis Trigger monitors your local pollen levels and fires every time the pollen count rises above the value you specify (1-12). NOTE: Available only in the USA.
- Sensor no longer detects waterThis trigger fires when specified water sensor tag transitions from detected water state to not detected water state, or when you open circuit its tip.
- Current humidity level rises aboveThis Trigger monitors your local humidity and fires every time the humidity rises above the value you specify.
- Out of rangeThis Trigger fires when a specified tag goes out of range. Note that the system can only determine whether a tag is out of range, if the "auto-update" is enabled.
- Current UV index rises aboveThis Trigger monitors your local UV levels and fires every time the UV index rises above the value you specify (0-16).
- Back in rangeThis Trigger fires when a specified tag comes out of "out of range" state. Only tags with auto-update is enabled can come out of "out of range" state.
- Tag Manager OfflineThis Trigger fires when the server detects that specified tag manager lost Internet connection due to power outage or Internet connection problems.
- Tag Manager OnlineThis Trigger fires when specified tag manager is back online.
- New KumoApp messageThis Trigger fires every time a specific KumoApp produces a log message with KumoApp.Log call with a specific type.
- Update receivedThis Trigger fires every time a temperature/humidity/lux update is received from specified sensor/tag(s).
- Too brightThis Trigger fires when a specified tag senses that its ambient light exceeds an upper threshold configured at light options screen inside the WirelessTag app. For example, this can be used to detect fridge door open.
- Too darkThis Trigger fires when a specified tag senses that its ambient light exceeds an lower threshold configured at light options screen inside the WirelessTag app. For example, this can be used to turn on a light in a room.
- Brightness returns to normalThis Trigger fires when a specified tag senses that its ambient light intensity returns between the upper and lower thresholds configured at light options screen inside the WirelessTag app.
Queries (With)
- Current Tag StateThis query returns specified door/window sensor/tag's current state, including temperature, humidity/lux (when available) and motion state such as door open/close, moved, or detected motion (for PIR sensor)
- Current weatherGet the current weather
- Current Tag Manager StateThe query returns if the specified tag manager is online or offline, as well as how many hours it has been online.
- Two day forecastTwo day forecast
- History of temperature returning to normalThis query returns a list of when the specified tag sensed that its ambient temperature had returned between the upper and lower thresholds configured on the temperature options screen inside the WirelessTag app. Note: this query will only return future e
- History of humidity level rose above thresholdThis query monitors your local humidity and returns a list of times when the humidity rose above the value you specified. Note: this query will only return future events after this Applet is created.
- History of tag manager offlineThis query returns a list of when the server detects that specified tag manager lost Internet connection due to power outage or Internet connection problems.
- History of Wind speed rose above thresholdThis query returns a list of times when the wind speed rose above a value you specify in your location. Note: this query will only return future events after this Applet is created.
- History of when temperature was too lowThis query returns a list of when a specified tag sensed that its ambient temperature fell below a threshold. Note: this query will only return future events after this Applet is created.
- History of pollen count rose above thresholdThis query monitors your local pollen levels and returns a list of times when the pollen count rose above the value you specified (1-12). NOTE: Available only in the USA. Note: this query will only return future events after this Applet is created.
- History of High Temperature alertsThis query returns a list of times when a specified tag senses that its ambient temperature exceeded an upper threshold configured at temperature options screen inside the WirelessTag app. Note: this query will only return future events after this Applet
- History of Tomorrow's Forecast was above threshold alertsThis query returns a list of times when tomorrows forecasted high temperature rose above a value you provided. Note: this query will only return future events after this Applet is created.
- History of humidity or moisture is too highThis query returns a list of when a specified tag with humidity or moisture monitoring enabled, detects "too wet" state.
- History of Tomorrow's Forecast drops below alertsThis query returns a list of alerts when tomorrows forecasted low temperature dropped below a value you provided. Note: this query will only return future events after this Applet is created.
- History of when the tag manager was onlineThis query returns a list of when the specified tag manager was back online.
- History of temperatre rose above thresholdThis query monitors your local temperature and returns a list of times when the temperature rose above the value you provided. Note: this query will only return future events after this Applet is created.
- History of sensor no longer detects waterThis query returns a list of when specified water sensor tag transitions from detected water state to not detected water state, or when you open circuit its tip.
- History of temperature dropped below thresholdThis query monitors your local temperature and returns a list of times when the temperature dropped below the value you provide. Note: this query will only return future events after this Applet is created.
- History of tag movesThis query returns a list of when specified motion sensor tag(s) armed in motion detection mode, have moved.
- History of UV index rose above thresholdThis query monitors your local UV levels and returns a list of times when the UV index rose above the value you specified (0-16). Note: this query will only return future events after this Applet is created.
- History of tag out of rangeThis query returns a list of when a specified tag goes out of range. Note that the system can only determine whether a tag was out of range, if the "auto-update" was enabled.
- History of SunrisesThis query returns a history of sunrises in your location. Note: this query will only return future events after this Applet is created.
- History of motion sensor has timed outThis query returns a list of when specified PIR KumoSensor or regular motion sensor tag detects no movement for a time-out period.
- History of SunsetsThis query returns a history of sunsets at your location.
- History of update receivedThis query returns a list of when a temperature/humidity/lux update was received from specified sensor/tag(s).
- History of specified weather conditionsThis query returns a list of times when the observed weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).
- History of door or window is openedThis query returns a list of when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window was open.
- History of specified forecast conditionsThis query returns a list of times when the forecasted weather changed to meet a specific condition (Rain, Snow, Cloudy, or Clear).
- History of too brightThis query returns a list of when a specified tag senses that its ambient light exceeds an upper threshold configured at light options screen inside the WirelessTag app. Note: this query will only return future events after this Applet is created.
- History of door or window is closedThis query returns a list of when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window was closed.
- History of KumoApp messagesThis query returns a list of every time a specific KumoApp produces a log message with KumoApp.Log call with a specific type.
Actions (Then that)
- Beep a tagThis Action will beep the tag. NOTE: Only compatible with the Motion Sensor Tags with buzzer.
- Stop beeping a tagThis Action will stop the tag beeping. This action can also be used to test tag connectivity.
- Turn on light or switchThis Action will turn on LED on the tag or a WeMo device.
- Turn off light or switchThis Action will turn off LED on the tag or a WeMo device.
- Arm motion sensorThis Action arms motion sensor on a tag. Regular angle based motion sensor, Reed KumoSensor and PIR KumoSensor can all be armed using this action.
- Disarm motion sensorThis Action disarms motion sensor on a tag. Regular angle based motion sensor, Reed KumoSensor and PIR KumoSensor can all be disarmed using this action.
- Enable temperature monitoringThis Action will enable temperature monitoring on a tag.
- Disable temperature monitoringThis Action will disable temperature monitoring on a tag.
- Enable humidity or moisture monitoringThis Action will enable humidity or moisture monitoring on a tag. NOTE: Only compatible with Tags with humidity or moisture sensor.
- Disable humidity or moisture monitoringThis Action will disable humidity or moisture monitoring on a tag.
- Run a KumoAppThis Action will start a KumoApp installed under the current user account. If the KumoApp is running, nothing will happen. If a KumoApp does not register any event handler or timer, it will automatically stop after executing the first time, allowing this action to run multiple times without user intervention.
- Stop a KumoAppThis Action will stop a KumoApp. If the KumoApp is not running, nothing will happen.
- Enable brightness monitoringThis Action will enable brightness/ambient light intensity monitoring on a tag. NOTE: Only compatible with Tags with ambient light sensor.
- Disable brightness monitoringThis Action will disable brightness/ambient light intensity monitoring on a tag.
- Update Temperature/Humidity/LuxThis action will force an update to read the current temperature, humidity and ambient light (when available).
IFTTT helps all your apps and devices work better together