Turn on Siren
Start today
Triggers (If this)
Actions (Then that)
Other popular ASUS ZenEye workflows and automations
-
-
-
ZenEye tigger ASUS Router firmware update
-
-
ZenEye turn on siren when the camera is detected sound
-
-
Turn off Guard when a specific number answered in phone call
-
-
ZenEye Cam sound notification
-
-
Turn off ZenEye Guard mode when you get home
-
-
Email to me when ZenEye Cam detect sound
-
-
ZenEye Sound detecte action
-
-
ZenEye Cam motion notification
-
Useful ASUS ZenEye and TrickleStar Connected Products integrations
Triggers (If this)
-
Thermostat mode or setpoint changes
This trigger fires when TrickleStar Thermostat system mode or setpoint changes.
-
Motion is detected
This trigger fires when VivoCam detect a motion event
-
Thermostat occupancy changes
This trigger fires when TrickleStar Thermostat occupancy changes.
-
Sound is detected
This trigger fires when VivoCam detect a sound event
-
Thermostat room temperature is greater than
This trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
-
Night Vision is enabled
This trigger fires when VivoCam changes to night vision model.
-
Thermostat room temperature is less than
This trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
-
WHC detects a leak
This trigger fires when TrickleStar Water Heater Controller detects a leak.
Thermostat mode or setpoint changes
This trigger fires when TrickleStar Thermostat system mode or setpoint changes.
Motion is detected
This trigger fires when VivoCam detect a motion event
Thermostat occupancy changes
This trigger fires when TrickleStar Thermostat occupancy changes.
Sound is detected
This trigger fires when VivoCam detect a sound event
Thermostat room temperature is greater than
This trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
Night Vision is enabled
This trigger fires when VivoCam changes to night vision model.
Thermostat room temperature is less than
This trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
WHC detects a leak
This trigger fires when TrickleStar Water Heater Controller detects a leak.
Queries (With)
Actions (Then that)
-
Turn device on
This action turns on your TrickleStar Connected Product.
-
Turn on Guard
This action will enable VivoCam Guard mode. When Guard mode is enabled, the camera starts monitoring for your home security.
-
Turn device off
This action turns off your TrickleStar Connected Product.
-
Turn off siren
This action will disable VivoCam Base Station siren
-
Set thermostat temporary hold
This action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
-
Turn off Guard
This action will disable VivoCam Guard mode. When Guard mode is disabled, the camera stops monitoring for your privacy.
-
Resume thermostat schedule
This action will resume schedule on your TrickleStar thermostat.
-
Turn on siren
This action will enable VivoCam Base Station siren
-
Set thermostat fan on
This action sets the HVAC fan on on your TrickleStar Thermostat.
-
Set thermostat fan to auto
This action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
-
Set thermostat fan to run once
This action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
-
Schedule vacation event
This action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
Turn device on
This action turns on your TrickleStar Connected Product.
Turn on Guard
This action will enable VivoCam Guard mode. When Guard mode is enabled, the camera starts monitoring for your home security.
Turn device off
This action turns off your TrickleStar Connected Product.
Turn off siren
This action will disable VivoCam Base Station siren
Set thermostat temporary hold
This action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
Turn off Guard
This action will disable VivoCam Guard mode. When Guard mode is disabled, the camera stops monitoring for your privacy.
Resume thermostat schedule
This action will resume schedule on your TrickleStar thermostat.
Turn on siren
This action will enable VivoCam Base Station siren
Set thermostat fan on
This action sets the HVAC fan on on your TrickleStar Thermostat.
Set thermostat fan to auto
This action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
Set thermostat fan to run once
This action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
Schedule vacation event
This action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
IFTTT helps all your apps and devices work better together