Connect GraspIO to Nefit Easy and unlock powerful automations

This trigger fires every time the room temperature changes by a pre-selected amount.

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires whenever a notification is created by your heating system. This could be a low pressure warning or error message.

This trigger fires when the Digital Sensor value matches the specified condition.

This Trigger fires when your local room temperature drops below a given threshold.

This Trigger fires when your local room temperature exceeds a given threshold.

This query returns a list of when the room temperature changes by a pre-selected amount.

This action will run a project saved in your GraspIO Studio account.

This Action will increase the room temperature by a configurable amount.

This action will display text on the OLED.

This Action will decrease the room temperature by a configurable amount.

This action will turn on the RGB LED with the selected color.

This Action will set the current room temperature to a level of your choice. This temperature level can be adjusted manually or if Clock Mode is activated.

This action will alternately display two colors for the selected duration/delay on the LED .

This Action will set your Nefit Easy to auto mode. The auto mode (e.g. clock mode, holiday mode) sets the temperatures accordingly.

This action will make the board speak using the interfaced Speaker.

This Action will set your Nefit Easy to manual mode.

This action will capture a photo or GIF using the interfaced camera.

This Action will set your room temperature to a new set point for a configurable period.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.