Connect GraspIO to Yeelight and unlock powerful automations

This trigger fires when the Analog Sensor value matches the specified condition.

This trigger fires when the Digital Sensor value matches the specified condition.

This query returns the on/off state of the device you choose

This query returns the color temperature value of the device you choose

This query returns the color value of the device you choose

This query returns the brightness of the device you choose

This action will run a project saved in your GraspIO Studio account.

This Action will turn on, turn off or toggle your lights.

This action will display text on the OLED.

This Action will set your lights to a specified brightness.

This action will turn on the RGB LED with the selected color.

This Action will change your lights to a specified color.

This action will alternately display two colors for the selected duration/delay on the LED .

This Action will change your lights to specified color temperature.

This action will make the board speak using the interfaced Speaker.

This Action will set your lights to a pre-defined scene.

This action will capture a photo or GIF using the interfaced camera.

This action will change your light's brightness to the specified level.

This action will control the Servo Motor angle and speed.

This action will control the Digital Output ports on the board.

This action will beep the buzzer by turning it on and off at the desired frequency.