Door/Window Open - Heating Off
Other popular Heatmiser workflows and automations
-
1
-
-
Activate Standby Mode if the outside temperature rises above a certain level
96
-
-
Set the Temperature on a Heatmiser Thermostat when Apilio triggers and action
-
-
Door/Window Closed - Re-Enable Heating
-
-
Turn on neoplug at sunset
15
-
-
Get an email when a new Heatmiser Applet is published
44
-
-
Geolocation (Set Temp Adjustment) - Time Dependant
5
-
-
Arriving Home - Turn the Lights On
1
-
-
Quick temperature hold
77
-
Build your own Heatmiser and Nefit Easy automations
Triggers (If this)
-
Temperature rises above
This Trigger fires every time the temperature rises above a threshold you specify.
-
Room temperature changed
This trigger fires every time the room temperature changes by a pre-selected amount.
-
Temperature drops below
This Trigger fires every time the temperature drops above a threshold you specify.
-
Notification
This trigger fires whenever a notification is created by your heating system. This could be a low pressure warning or error message.
-
neoHub Away Mode
This trigger fires when your neoHub is set to away mode.
-
Temperature drops below
This Trigger fires when your local room temperature drops below a given threshold.
-
neoHub Home Mode
Triggers when your neoHub returns to Home Mode.
-
Temperature rises above
This Trigger fires when your local room temperature exceeds a given threshold.
-
Low Battery
This trigger fires when your Heatmiser Device has a Low Battery.
-
Contact Sensor Closed
This trigger fires when the Contact Sensor is closed
-
Contact Sensor Open
This trigger fires when the Contact Sensor is opened
Temperature rises above
This Trigger fires every time the temperature rises above a threshold you specify.
Room temperature changed
This trigger fires every time the room temperature changes by a pre-selected amount.
Temperature drops below
This Trigger fires every time the temperature drops above a threshold you specify.
Notification
This trigger fires whenever a notification is created by your heating system. This could be a low pressure warning or error message.
neoHub Away Mode
This trigger fires when your neoHub is set to away mode.
Temperature drops below
This Trigger fires when your local room temperature drops below a given threshold.
neoHub Home Mode
Triggers when your neoHub returns to Home Mode.
Temperature rises above
This Trigger fires when your local room temperature exceeds a given threshold.
Low Battery
This trigger fires when your Heatmiser Device has a Low Battery.
Contact Sensor Closed
This trigger fires when the Contact Sensor is closed
Contact Sensor Open
This trigger fires when the Contact Sensor is opened
Queries (With)
Actions (Then that)
-
Cancel temperature hold
This Action will cancel a temperature hold on the selected Heatmiser Thermostat.
-
Increase room temperature
This Action will increase the room temperature by a configurable amount.
-
Set temperature hold
This Action will enable a temperature hold on the selected Heatmiser Thermostat.
-
Decrease room temperature
This Action will decrease the room temperature by a configurable amount.
-
Turn neoPlug on
This Action will allow you to switch on the selected neoPlug.
-
Set room temperature
This Action will set the current room temperature to a level of your choice. This temperature level can be adjusted manually or if Clock Mode is activated.
-
Turn neoPlug off
This Action will turn off the selected neoPlug.
-
Set auto mode
This Action will set your Nefit Easy to auto mode. The auto mode (e.g. clock mode, holiday mode) sets the temperatures accordingly.
-
Set Temperature
The Action will set the temperature on the selected Heatmiser Thermostat.
-
Set manual mode
This Action will set your Nefit Easy to manual mode.
-
Boost Timer
This Action will activate a Timer Boost on the selected Heatmiser Timer.
-
Activate overwork timer
This Action will set your room temperature to a new set point for a configurable period.
-
Set Away Mode
This Action will activate Away Mode on your neoHub
-
Set Home Mode
The Action will activate Home Mode on your neoHub.
-
Set Standby Mode
This Action will activate Standby Mode on the selected Heatmiser Thermostat.
-
Cancel Standby Mode
This Action will cancel Standby Mode on the selected Heatmiser Thermostat.
-
Run Profile
This action will send a stored profile to the selected thermostat.
-
Run recipe
This action will run a Heatmiser Neo recipe.
Cancel temperature hold
This Action will cancel a temperature hold on the selected Heatmiser Thermostat.
Increase room temperature
This Action will increase the room temperature by a configurable amount.
Set temperature hold
This Action will enable a temperature hold on the selected Heatmiser Thermostat.
Decrease room temperature
This Action will decrease the room temperature by a configurable amount.
Turn neoPlug on
This Action will allow you to switch on the selected neoPlug.
Set room temperature
This Action will set the current room temperature to a level of your choice. This temperature level can be adjusted manually or if Clock Mode is activated.
Turn neoPlug off
This Action will turn off the selected neoPlug.
Set auto mode
This Action will set your Nefit Easy to auto mode. The auto mode (e.g. clock mode, holiday mode) sets the temperatures accordingly.
Set Temperature
The Action will set the temperature on the selected Heatmiser Thermostat.
Set manual mode
This Action will set your Nefit Easy to manual mode.
Boost Timer
This Action will activate a Timer Boost on the selected Heatmiser Timer.
Activate overwork timer
This Action will set your room temperature to a new set point for a configurable period.
Set Away Mode
This Action will activate Away Mode on your neoHub
Set Home Mode
The Action will activate Home Mode on your neoHub.
Set Standby Mode
This Action will activate Standby Mode on the selected Heatmiser Thermostat.
Cancel Standby Mode
This Action will cancel Standby Mode on the selected Heatmiser Thermostat.
Run Profile
This action will send a stored profile to the selected thermostat.
Run recipe
This action will run a Heatmiser Neo recipe.
How to connect Heatmiser and Nefit Easy
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your Heatmiser and Nefit Easy accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together