This trigger monitors the UbiBot device's selected Field readings and fires whenever the reading rises above or drops below the value you provide.

This Trigger fires if the iZone system is turned off.

This trigger monitors the UbiBot device's built-in temperature sensor readings and fires whenever the temperature rises above or drops below the value you provide.

This trigger fires when an iLight is turned on.

This trigger monitors the UbiBot device's built-in humidity sensor readings and fires whenever the humidity rises above or drops below the value you provide.

This trigger fires when an iLight is turned off.

This trigger monitors the UbiBot device's built-in light sensor readings and fires whenever the light level rises above or drops below the value in lux you provide.

This trigger fires when one iLight switch battery low alarmed.

This trigger monitors the voltage of the batteries or USB power and fires whenever the voltage rises above or drops below the value you provide.

This trigger fires when your iDrate is turned on.

This trigger monitors the status of the external power supply (USB) that connects to the device and fires whenever the power supply is up or down.

This Trigger fires if the A/C systems supply air temperature rises above a specified threshold.

This trigger fires when your UbiBot device is offline.

This Trigger fires if the iZone systems supply air temperature falls below a specified threshold.

This trigger monitors the status of the motion sensor and fires whenever motion is detected or undetected.

This trigger fires when your iDrate is turned off.

This trigger monitors the UbiBot device's external DS18B20 temperature probe 1's readings and fires whenever the temperature rises above or drops below the value you provide (Available for WS1 and WS1-PRO devices).

This Trigger fires when a zone's actual temperature rises above a specified threshold.

This trigger monitors the UbiBot device's external DS18B20 temperature probe 2's readings and fires whenever the temperature rises above or drops below the value you provide. (Available for WS1-PRO devices)

This trigger fires when an iDrate controller detects a fault.

This trigger monitors the UbiBot device's external TH30S probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This trigger fires when an iDrate Station detects a fault.

This trigger monitors the UbiBot device's external TH30S probe Humidity readings and fires whenever the Humidity rises above or drops below the value you provide (Available for WS1-PRO and GS1 devices).

This Trigger fires when a zone's actual temperature falls below a specified threshold.

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the moisture level rises above or drops below the value you provide.

This Trigger fires when the AC unit temperature rises above a specified threshold.

This trigger monitors the UbiBot device's external Soil Probe Moisture readings and fires whenever the temperature level rises above or drops below the value you provide.

This Trigger fires when the AC unit temperature falls below a specified threshold.

This trigger monitors the UbiBot device's external PT100 probe Temperature readings and fires whenever the Temperature rises above or drops below the value you provide.

This Trigger fires if the iZone system is turned on.

This trigger monitors the WS1 vibration sensor readings and fires whenever the vibration index rises above or drops below the value you provide.

This trigger monitors the UbiBot device's connected Carbon Dioxide (CO2) probe readings and fires whenever the result rises above or drops below the value you provide.

This query returns a list of if the iZone systems supply air temperature falls below a specified threshold. Note: this query will only return future events after this Applet is created.

This query monitors the WS1 vibration sensor readings and returns a list of whenever the vibration index rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of when an iDrate Station detects a fault.

This query monitors the UbiBot device's built-in light sensor readings and returns a list of whenever the light level rose above or dropped below the value in lux you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of when an iLight was turned on.

This query returns a list of when the UbiBot device's external Soil Probe Moisture level rises above or drops below the value you provide. Note: this query will only return future events after this Applet is created.

This query returns a list of if the iZone system was turned off.

This query returns a list of when your UbiBot receives new sensor data. The raw data can be exported to other services, such as Google Spreadsheet.

This query returns a list of when your iDrate was turned on.

This query returns a list of when an iLight was turned off.

This query returns a list of when the iZone system was turned on.

This query returns a list of when the AC unit temperature rises above a specified threshold. Note: this query will only return future events after this Applet is created.

This action will turn all iLights on.

Send Action Command to Any Target Channel

This action will turn all iLights off.

Send Action RAW Command to Any Target Channel

This action will turn the specified iLight on.

Send Action Command to Turn On or Off your UbiBot Smart Plug

This action will turn the specified iLight off.

Send Action Command to Turn On or Off your UbiBot Network Relay Switch

This Action will decrease the A/C setpoint by the selected number of degrees celcius.

Change the brightness of an iLight.

This Action will set the selected zone to selected mode

This Action will set iSave for the selected iZone system. The iSave cools your whole home using your ducted reverse cycle air conditioner’s fan mode for only a few cents an hour.

This Action will change the iZone A/C system's setpoint temperature.

This Action will increase the A/C setpoint temperature by selected number of degrees celcius.

This Action will change the selected zone setpoint temperature.

This Action will increase the selected zone setpoint temperature by the selected number of degrees celcius.

This Action will decrease the selected zone setpoint temperature by the selected number of degrees celcius.

This action will change the colour of the iLight.

This action will change the special effect for the iLight.

This Action will activate the selected iZone favourite.

This action will activate a specified favourite for your iLight.

This action will run the selected Program on the iDrate.

This action will turn the iDrate system on.

This action will turn the iDrate system off.

This action will changes the iDrate weather mode to fine.

This action will run the selected iDrate station.

This action will change the station run times by the selected percentage. This will increase or decrease the programmed station running time.

This Action will turn on the iZone system.

This Action will change the iZone air condition system to the selected mode.

This Action will set the iZone A/C system to the selected fan speed.

This Action will turn off the iZone AC system.

This Action will set the A/C sleep timer to a predetermined period.