Power Saver
Other popular LightwaveRF Power workflows and automations
-
-
-
Temperature Drop Turn off
-
-
Get an email when a new LightwaveRF Power Applet is published
10
-
-
Turn on light when I get home
-
-
Lock a LightwaveRF Socket at a specific time
5
-
-
Turn a LightwaveRF socket on when you get home
18
-
-
Turn pond pump on at a set time
1
-
-
Close a LightwaveRF Relay when it's sunset
4
-
-
Turn a LightwaveRF socket on when you get home
42
-
Build your own LightwaveRF Power and MIYO automations
Triggers (If this)
-
Irrigation has started
This trigger fires if irrigation for an irrigation area has started
-
Socket switched on
This trigger fires whenever a socket is turned on.
-
Irrigation has stopped
This trigger fires if irrigation has stopped for given irrigation area
-
Socket switched off
This trigger fires whenever a socket is turned off.
-
Soil is dry
This trigger fires if soil is dry for given irrigation area compared to your moisture borders
-
Soil is wet
This trigger fires if soil is wet enough for given irrigation area compared to your moisture borders
Irrigation has started
This trigger fires if irrigation for an irrigation area has started
Socket switched on
This trigger fires whenever a socket is turned on.
Irrigation has stopped
This trigger fires if irrigation has stopped for given irrigation area
Socket switched off
This trigger fires whenever a socket is turned off.
Soil is dry
This trigger fires if soil is dry for given irrigation area compared to your moisture borders
Soil is wet
This trigger fires if soil is wet enough for given irrigation area compared to your moisture borders
Queries (With)
-
History of irrigation has started
This query returns a list of when irrigation for an area has started.
-
History of socket ons
This query returns a list of whenever a socket was turned on.
-
History of dry soil
This query returns a list of when soil was dry for given irrigation area compared to your moisture borders
-
History of irrigation stops
This query returns a list of if irrigation was stopped for given irrigation area
History of irrigation has started
This query returns a list of when irrigation for an area has started.
History of socket ons
This query returns a list of whenever a socket was turned on.
History of dry soil
This query returns a list of when soil was dry for given irrigation area compared to your moisture borders
History of irrigation stops
This query returns a list of if irrigation was stopped for given irrigation area
Actions (Then that)
-
Switch on a socket
This Action will switch on your socket.
-
Start irrigation
This action will start irrigation for the given irrigation area.
-
Switch off a socket
This Action will switch off a socket.
-
Stop irrigation
This action will stop irrigation for the given irrigation area.
-
Lock device
This Action will lock a device, preventing use of the physical buttons on the device.
-
Activate automode
This action will activate automatic irrigation for the given irrigation area.
-
Unlock a device
This Action will unlock a device, allowing use of the physical buttons on the device.
-
Deactivate automode
This action will deactivate automatic irrigation for given irrigation area until it is activated again. E.g. if you have a garden party you can deactivate sprinklers using this action.
-
Fully lock a device
This Action will fully lock a device, preventing both the use of physical buttons and radio control of the device.
-
Send rain detected notification
This action will notify MIYO if it is raining or not. This action can be used to integrate existing rain sensors into your irrigation system.
-
Open a relay
This Action will open a relay.
-
Firmware update
This action will check and install updates to your cube.
-
Close a relay
This Action will close a relay.
-
Automower status
The irrigation should not start as long as the automower is still mowing. To handle this situation, MIYO can be informed if the automower has started or finished mowing.
-
Stop a relay
This Action will stop a relay.
Switch on a socket
This Action will switch on your socket.
Start irrigation
This action will start irrigation for the given irrigation area.
Switch off a socket
This Action will switch off a socket.
Stop irrigation
This action will stop irrigation for the given irrigation area.
Lock device
This Action will lock a device, preventing use of the physical buttons on the device.
Activate automode
This action will activate automatic irrigation for the given irrigation area.
Unlock a device
This Action will unlock a device, allowing use of the physical buttons on the device.
Deactivate automode
This action will deactivate automatic irrigation for given irrigation area until it is activated again. E.g. if you have a garden party you can deactivate sprinklers using this action.
Fully lock a device
This Action will fully lock a device, preventing both the use of physical buttons and radio control of the device.
Send rain detected notification
This action will notify MIYO if it is raining or not. This action can be used to integrate existing rain sensors into your irrigation system.
Open a relay
This Action will open a relay.
Firmware update
This action will check and install updates to your cube.
Close a relay
This Action will close a relay.
Automower status
The irrigation should not start as long as the automower is still mowing. To handle this situation, MIYO can be informed if the automower has started or finished mowing.
Stop a relay
This Action will stop a relay.
How to connect LightwaveRF Power and MIYO
Find or create an Applet
Start by discovering an automation to connect or customizing your own. It's quick and easy.Connect IFTTT to your accounts
Securely connect your LightwaveRF Power and MIYO accounts.Finalize and customize your Applet
Review your trigger and action settings. Your Applet is ready to go!
IFTTT helps all your apps and devices work better together