Connect LightwaveRF Power to TrickleStar Connected Products and unlock powerful automations

This trigger fires when TrickleStar Thermostat system mode or setpoint changes.

This trigger fires whenever a socket is turned on.

This trigger fires when TrickleStar Thermostat occupancy changes.

This trigger fires whenever a socket is turned off.

This trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.

This trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.

This trigger fires when TrickleStar Water Heater Controller detects a leak.

This query returns a list of all my TrickleStar devices and their online status.

This query returns a list of whenever a socket was turned on.

This action turns on your TrickleStar Connected Product.

This Action will switch on your socket.

This action turns off your TrickleStar Connected Product.

This Action will switch off a socket.

This action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.

This Action will lock a device, preventing use of the physical buttons on the device.

This action will resume schedule on your TrickleStar thermostat.

This Action will unlock a device, allowing use of the physical buttons on the device.

This action sets the HVAC fan on on your TrickleStar Thermostat.

This Action will fully lock a device, preventing both the use of physical buttons and radio control of the device.

This action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.

This Action will open a relay.

This action turns on the HVAC fan for one run cycle, with a configurable fan run duration.

This Action will close a relay.

This action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".

This Action will stop a relay.