Close the gate automatically everyday
Start today
Other popular Merik workflows and automations
- Close the Gate/Door via Google Assistant
- Notify Opening Door By LINE
- Trigger JANO(cycle mode) Door 1 automatically everyday
- Trigger JANO(cycle mode) Door 3 automatically everyday.
- Trigger JANO(cycle mode) Door 2 automatically everyday.
- Close the gate when you leave home
- Button press Close the Gate
- Trigger JANO(cycle mode) Door 4 automatically everyday.
Useful Merik and TrickleStar Connected Products integrations
Triggers (If this)
- OpeningThis trigger fires when the gate start opening
- Thermostat mode or setpoint changesThis trigger fires when TrickleStar Thermostat system mode or setpoint changes.
- OpenedThis trigger fires when the gate complete opened
- Thermostat occupancy changesThis trigger fires when TrickleStar Thermostat occupancy changes.
- ClosedThis trigger fires when the gate complete closed
- Thermostat room temperature is greater thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
- ClosingThis trigger fires when the gate start closing
- Thermostat room temperature is less thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
- Sensor 1 - JANOThis trigger fires when JANO sensor 1 triggered
- WHC detects a leakThis trigger fires when TrickleStar Water Heater Controller detects a leak.
- Sensor 2 - JANOThis trigger fires when JANO sensor 2 triggered
- Sensor 3 - JANOThis trigger fires when JANO sensor 3 triggered
- Sensor 4 - JANOThis trigger fires when JANO sensor 4 triggered
- OvercurrentThis trigger fires when the gate stopped by overcurrent protection
- PhotocellThis trigger fires when the gate stopped by safety device activated
- Hall Sensor AbnormalThis trigger fires when the gate motor hall sensor broken
Queries (With)
Actions (Then that)
- Turn device onThis action turns on your TrickleStar Connected Product.
- OpenThis action will help you to open the gate.
- Turn device offThis action turns off your TrickleStar Connected Product.
- CloseThis action will help you to close the gate
- Set thermostat temporary holdThis action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
- Relay 1 - JANOThis action will help you to trigger Relay 1 in JANO
- Resume thermostat scheduleThis action will resume schedule on your TrickleStar thermostat.
- Relay 2 - JANOThis action will help you to trigger Relay 2 in JANO
- Set thermostat fan onThis action sets the HVAC fan on on your TrickleStar Thermostat.
- Relay 3 - JANOThis action will help you to trigger Relay 3 in JANO
- Set thermostat fan to autoThis action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
- Relay 4 - JANOThis action will help you to trigger Relay 4 in JANO
- Set thermostat fan to run onceThis action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
- Schedule vacation eventThis action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
IFTTT helps all your apps and devices work better together