Set My Thermostat Mode and Temperature Setpoint When I Leave My House
Start today
Other popular TrickleStar Connected Products workflows and automations
-
- Set My Thermostat Mode and Temperature Setpoint When Weather Underground Condition Has Changed
- Send a Gmail Alert Notification When the Room Temperature is Too Cold
- Run My Thermostat Schedule When Haven IAQ VOC Level is Back to a Healthy Reading
- Set My Thermostat Fan to Run Once When Haven IAQ PM Level Reaches an Unhealthy Reading
- Run My Thermostat Schedule When Haven IAQ PM Level is Back to a Healthy Reading
- Set My Thermostat Mode and Temperature Setpoint when Weather Underground Detects the Sun has Set
- Send a Gmail Alert Notification When the Room Temperature is Too Hot
- Send a Gmail Alert Notification When Water Heater Controller Detects a Leak
Useful TrickleStar Connected Products and WeMo Smart Plug integrations
Triggers (If this)
- Thermostat mode or setpoint changesThis trigger fires when TrickleStar Thermostat system mode or setpoint changes.
Switched onThis Trigger fires every time your WeMo Switch is turned on.- Thermostat occupancy changesThis trigger fires when TrickleStar Thermostat occupancy changes.
- Switched offThis Trigger fires every time your WeMo Switch is turned off.
- Thermostat room temperature is greater thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
- Thermostat room temperature is less thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
- WHC detects a leakThis trigger fires when TrickleStar Water Heater Controller detects a leak.
Queries (With)
Actions (Then that)
- Turn device onThis action turns on your TrickleStar Connected Product.
- Turn onThis Action will turn a WeMo Switch on. If the WeMo Switch is already on, it will remain on.
- Turn device offThis action turns off your TrickleStar Connected Product.
- Turn offThis Action will turn a WeMo Switch off. If the WeMo Switch is already off, it will remain off.
- Set thermostat temporary holdThis action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
- Turn on then offThis Action will turn a WeMo Switch on then immediately back off.
- Resume thermostat scheduleThis action will resume schedule on your TrickleStar thermostat.
- Turn off then onThis Action will turn a WeMo Switch off then immediately back on.
- Set thermostat fan onThis action sets the HVAC fan on on your TrickleStar Thermostat.
- Toggle on/offThis Action will toggle a WeMo Switch on or off.
- Set thermostat fan to autoThis action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
- Set thermostat fan to run onceThis action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
- Schedule vacation eventThis action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
IFTTT helps all your apps and devices work better together