Manually set Area lights to a specified level over a specified transition time
Start today
Other popular PMMI Lighting workflows and automations
-
- At sunset, set Area light level and transition time
- When SMS text message received from specified number on Android phone, trigger a lighting scene
1 - When outside temperature at a location drops below freezing, trigger a lighting scene
- When I enter a location, turn Area lights ON
- Every day at a specified time, trigger a lighting scene
- When call is missed from specified number on Android phone, turn Area Lights ON
- When I leave a location, turn Area lights OFF
- Manually trigger a lighting scene
Useful PMMI Lighting and TrickleStar Connected Products integrations
Triggers (If this)
Thermostat mode or setpoint changesThis trigger fires when TrickleStar Thermostat system mode or setpoint changes.- Thermostat occupancy changesThis trigger fires when TrickleStar Thermostat occupancy changes.
- Thermostat room temperature is greater thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature rises above the value you specified.
- Thermostat room temperature is less thanThis trigger fires every time your TrickleStar thermostat senses that the room temperature drops below the value you specified.
- WHC detects a leakThis trigger fires when TrickleStar Water Heater Controller detects a leak.
Queries (With)
- Get Areas and Current StateThis query returns area names, light levels, and types for all exposed areas for a specified serial number. Exposed areas are those with a numerical Display Order provided in the PMMI config file spreadsheet. Areas will be returned in Display Order.
- List all devicesThis query returns a list of all my TrickleStar devices and their online status.
- Get ScenesThis query returns valid scene names for a specified serial number.
- Get System InfoThis query returns lighting controller system information for a specified serial number including system name, type, software version, and current home/away state.
Actions (Then that)
- Turn device onThis action turns on your TrickleStar Connected Product.
- Toggle "Any" Area ON or OFFThis action will toggle an area ON of OFF. All areas (dimmable, toggle only, and daylight harvesting) are applicable to this action.
- Turn device offThis action turns off your TrickleStar Connected Product.
- Set "Dimmable" Area Light LevelThis action will set a "dimmable" Area/Zone light level between 0 and 100% using a specified transition time.
- Set thermostat temporary holdThis action will set temporary hold on your TrickleStar thermostat using the specified system mode and setpoint. The temporary hold will last until the next schedule event.
- Trigger A SceneThis action will trigger a scene.
- Resume thermostat scheduleThis action will resume schedule on your TrickleStar thermostat.
- Set thermostat fan onThis action sets the HVAC fan on on your TrickleStar Thermostat.
- Set thermostat fan to autoThis action sets the HVAC fan to Auto on your TrickleStar Thermostat. The Auto fan state means the fan will turn on when the HVAC system is on, and the fan will turn off when the HVAC system is off.
- Set thermostat fan to run onceThis action turns on the HVAC fan for one run cycle, with a configurable fan run duration.
- Schedule vacation eventThis action will schedule a vacation event on all devices of the selected site. It can be used with triggers like Google Calendar "Any event starts".
IFTTT helps all your apps and devices work better together