Disable motion detection when I arrive home
Start today
Triggers (If this)
Queries (With)
Actions (Then that)
Other popular Aqara Home for RU workflows and automations
-
-
-
Send a notification when natural gas is detected
-
-
Get a notification when camera detects a motion
1
-
-
Enable motion detection when I leave home
-
-
Send a notification when Aqara plug is turned off
-
-
Enable sound detection when I'm about to sleep
-
-
Open the door when I arrive home
-
-
Call me when fire is detected by Aqara
-
-
Get a notification when the door was opened
1
-
Useful Aqara Home for RU and Blue Connect integrations
Triggers (If this)
-
Wall Switch was turned on/off (for Single Rocker / Channel switch or module)
This trigger fires when the specified single rocker switch is turned on/off.
-
New water measurement
This trigger fires every time a new water measurement of a swimming pool is available.
-
Wireless Relay Controller was turned on/off (for 2 Channels )
This trigger fires when the specified Wireless Relay Controller is turned on/off.
-
Temperature becomes too low
This trigger fires when the temperature of your pool water has been evaluated as too low according to your swimming pool target values.
-
Hub light / bulb was turned on/off
This trigger fires when the specified light is turned on/off.
-
Temperature becomes OK
This trigger fires when the temperature of your pool water has been evaluated as OK according to your swimming pool target values.
-
Plug was turned on/off
This trigger fires when the specified plug is turned on/off.
-
Temperature becomes too high
This trigger fires when the temperature of your pool water has been evaluated as too high according to your swimming pool target values.
-
Leak is detected
This trigger fires when water leak is detected.
-
PH becomes too low
This trigger fires when the pH of your pool water has been evaluated as too low according to your swimming pool target values.
-
Tilt is detected
This trigger fires when the tilt is detected.
-
PH becomes OK
This trigger fires when the pH of your pool water has been evaluated as OK according to your swimming pool target values.
-
Motion is detected
This trigger fires when motion is detected.
-
PH becomes too high
This trigger fires when the pH of your pool water has been evaluated as too high according to your swimming pool target values.
-
Cube was tapped twice
This trigger fires when the cube was tapped twice.
-
ORP becomes too low
This trigger fires when the ORP of your pool water has been evaluated as too low according to your swimming pool target values.
-
Cube was triggered after one-minute inactivity
This trigger fires when the cube is triggered after one-minute inactivity.
-
ORP becomes OK
This trigger fires when the ORP of your pool water has been evaluated as OK according to your swimming pool target values.
-
Humidity reaches up to
This trigger fires when the humidity reaches the specified value.
-
ORP becomes too high
This trigger fires when the ORP of your pool water has been evaluated as too high according to your swimming pool target values.
-
Cube was rotated
This trigger fires when the cube was rotated.
-
Salinity becomes too low
This trigger fires when the salinity of your pool water has been evaluated as too low according to your swimming pool target values.
-
Click (for Wireless Double Rocker switches)
This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.
-
Salinity becomes OK
This trigger fires when the salinity of your pool water has been evaluated as OK according to your swimming pool target values.
-
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.
-
Salinity becomes too high
This trigger fires when the salinity of your pool water has been evaluated as too high according to your swimming pool target values.
-
Temperature reaches up to
This trigger fires when the temperature reaches the specified value.
-
No measurement received
This trigger fires when no measurement has been received for the last 2 hours.
-
Fire is detected
This trigger fires when fire is detected.
-
Temperature is < setpoint
This trigger fires when the temperature of your pool water is lower than your swimming pool "temperature setpoint".
-
Fire is disappeared
This trigger fires when fire is no detected.
-
Temperature is >= setpoint
This trigger fires when the temperature of your pool water is greater or equal to your swimming pool "temperature setpoint".
-
Water recedes
This trigger fires when the water recedes.
-
PH is <= setpoint
This trigger fires when the pH of your pool water is lower or equal to your swimming pool "pH setpoint".
-
Click (for Wireless Single Rocker / Mini switch)
This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.
-
PH is > setpoint
This trigger fires when the pH of your pool water is greater than your swimming pool "pH setpoint".
-
Door and window sensor is open
This trigger fires when the door and window sensor is open.
-
ORP is < setpoint
This trigger fires when the ORP of your pool water is smaller than your swimming pool "ORP setpoint".
-
Humidity drops to
This trigger fires when the humidity drops to the specified value.
-
ORP is >= setpoint
This trigger fires when the ORP of your pool water is greather or equal to your swimming pool "ORP setpoint".
-
Vibration is detected
This trigger fires when the vibration is detected.
-
Motion is detected and brightness is above
This trigger fires when the motion is detected and brightness is above the specified value.
-
Cube was shaken
This trigger fires when the cube was shaken.
-
Curtain is fully opened/closed
This trigger fires when the specified curtain is fully opened/closed.
-
Camera detects sound
This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.
-
Door and window sensor is closed
This trigger fires when the door and window sensor is closed.
-
Temperature drops to
This trigger fires when the temperature drops to the specified value.
-
TVOC drops to
This trigger fires when the tvoc drops to the specified value.
-
Cube was pushed
This trigger fires when the cube was pushed.
-
TVOC reaches up to
This trigger fires when the tvoc reaches the specified value.
-
Cube was flipped
This trigger fires when the the cube was flipped
-
Natural gas is disappeared
This trigger fires when no natural gas is detected.
-
Natural gas is detected
This trigger fires when natural gas is detected.
-
Motion is detected and brightness is below
This trigger fires when the motion is detected and brightness is below the specified value.
-
Drop is detected
This trigger fires when the drop is detected.
-
Low battery
The battery of the device is low
-
Bell ringing was detected
This trigger fires when When Bell ringing is detected
-
Forcible demolition alarm detected
This trigger fires when Forcible demolition alarm detected
-
Recognize the specified face
This trigger fires when recognize the specified face
-
Recognize strange faces
This trigger fires when recognize strange faces
-
Somebody linger
This trigger fires when somebody is lingering at your doorstep
-
Cube flip to side 1
This trigger fires when the cube flip to side 1
-
Cube flip to side 2
This trigger fires when the cube flip to side 2
-
Cube flip to side 3
This trigger fires when the cube flip to side 3
-
Cube flip to side 4
This trigger fires when the cube flip to side 4
-
Cube flip to side 5
This trigger fires when the cube flip to side 5
-
Cube flip to side 6
This trigger fires when the cube flip to side 6
-
Zone detection
This trigger fires when an event is detected in the zone
-
Presence is detected
This trigger fires when Presence detected.
-
Absence is detected
This trigger fires when absence detected.
-
Pet detected
This trigger fires when when the camera detects pet.
-
Package detected
This trigger fires when when the camera detects package.
-
Unknown vehicle detected
This trigger fires when when the camera detects unknown vehicle.
-
Human detected
This trigger fires when when the camera detects human.
-
Recognize the specified vehicle
This trigger fires when when the camera recognize the specified vehicle.
-
The door is closed
this trigger fires when the door, gate, window is closed
-
The door is opened
this trigger fires when the door, gate, window is opened
Wall Switch was turned on/off (for Single Rocker / Channel switch or module)
This trigger fires when the specified single rocker switch is turned on/off.
New water measurement
This trigger fires every time a new water measurement of a swimming pool is available.
Wireless Relay Controller was turned on/off (for 2 Channels )
This trigger fires when the specified Wireless Relay Controller is turned on/off.
Temperature becomes too low
This trigger fires when the temperature of your pool water has been evaluated as too low according to your swimming pool target values.
Hub light / bulb was turned on/off
This trigger fires when the specified light is turned on/off.
Temperature becomes OK
This trigger fires when the temperature of your pool water has been evaluated as OK according to your swimming pool target values.
Plug was turned on/off
This trigger fires when the specified plug is turned on/off.
Temperature becomes too high
This trigger fires when the temperature of your pool water has been evaluated as too high according to your swimming pool target values.
Leak is detected
This trigger fires when water leak is detected.
PH becomes too low
This trigger fires when the pH of your pool water has been evaluated as too low according to your swimming pool target values.
Tilt is detected
This trigger fires when the tilt is detected.
PH becomes OK
This trigger fires when the pH of your pool water has been evaluated as OK according to your swimming pool target values.
Motion is detected
This trigger fires when motion is detected.
PH becomes too high
This trigger fires when the pH of your pool water has been evaluated as too high according to your swimming pool target values.
Cube was tapped twice
This trigger fires when the cube was tapped twice.
ORP becomes too low
This trigger fires when the ORP of your pool water has been evaluated as too low according to your swimming pool target values.
Cube was triggered after one-minute inactivity
This trigger fires when the cube is triggered after one-minute inactivity.
ORP becomes OK
This trigger fires when the ORP of your pool water has been evaluated as OK according to your swimming pool target values.
Humidity reaches up to
This trigger fires when the humidity reaches the specified value.
ORP becomes too high
This trigger fires when the ORP of your pool water has been evaluated as too high according to your swimming pool target values.
Cube was rotated
This trigger fires when the cube was rotated.
Salinity becomes too low
This trigger fires when the salinity of your pool water has been evaluated as too low according to your swimming pool target values.
Click (for Wireless Double Rocker switches)
This trigger fires when the specified double rocker switch is single clicked/double clicked/long pressed.
Salinity becomes OK
This trigger fires when the salinity of your pool water has been evaluated as OK according to your swimming pool target values.
Camera detects motion
This trigger fires when the specified camera detects motion. To use this trigger, camera's motion detection should be turned on.
Salinity becomes too high
This trigger fires when the salinity of your pool water has been evaluated as too high according to your swimming pool target values.
Temperature reaches up to
This trigger fires when the temperature reaches the specified value.
No measurement received
This trigger fires when no measurement has been received for the last 2 hours.
Fire is detected
This trigger fires when fire is detected.
Temperature is < setpoint
This trigger fires when the temperature of your pool water is lower than your swimming pool "temperature setpoint".
Fire is disappeared
This trigger fires when fire is no detected.
Temperature is >= setpoint
This trigger fires when the temperature of your pool water is greater or equal to your swimming pool "temperature setpoint".
Water recedes
This trigger fires when the water recedes.
PH is <= setpoint
This trigger fires when the pH of your pool water is lower or equal to your swimming pool "pH setpoint".
Click (for Wireless Single Rocker / Mini switch)
This trigger fires when the specified single rocker switch is single clicked/double clicked/long pressed.
PH is > setpoint
This trigger fires when the pH of your pool water is greater than your swimming pool "pH setpoint".
Door and window sensor is open
This trigger fires when the door and window sensor is open.
ORP is < setpoint
This trigger fires when the ORP of your pool water is smaller than your swimming pool "ORP setpoint".
Humidity drops to
This trigger fires when the humidity drops to the specified value.
ORP is >= setpoint
This trigger fires when the ORP of your pool water is greather or equal to your swimming pool "ORP setpoint".
Vibration is detected
This trigger fires when the vibration is detected.
Motion is detected and brightness is above
This trigger fires when the motion is detected and brightness is above the specified value.
Cube was shaken
This trigger fires when the cube was shaken.
Curtain is fully opened/closed
This trigger fires when the specified curtain is fully opened/closed.
Camera detects sound
This trigger fires when the specified camera detects sounds. To use this trigger, camera's sound detection should be turned on.
Door and window sensor is closed
This trigger fires when the door and window sensor is closed.
Temperature drops to
This trigger fires when the temperature drops to the specified value.
TVOC drops to
This trigger fires when the tvoc drops to the specified value.
Cube was pushed
This trigger fires when the cube was pushed.
TVOC reaches up to
This trigger fires when the tvoc reaches the specified value.
Cube was flipped
This trigger fires when the the cube was flipped
Natural gas is disappeared
This trigger fires when no natural gas is detected.
Natural gas is detected
This trigger fires when natural gas is detected.
Motion is detected and brightness is below
This trigger fires when the motion is detected and brightness is below the specified value.
Drop is detected
This trigger fires when the drop is detected.
Low battery
The battery of the device is low
Bell ringing was detected
This trigger fires when When Bell ringing is detected
Forcible demolition alarm detected
This trigger fires when Forcible demolition alarm detected
Recognize the specified face
This trigger fires when recognize the specified face
Recognize strange faces
This trigger fires when recognize strange faces
Somebody linger
This trigger fires when somebody is lingering at your doorstep
Cube flip to side 1
This trigger fires when the cube flip to side 1
Cube flip to side 2
This trigger fires when the cube flip to side 2
Cube flip to side 3
This trigger fires when the cube flip to side 3
Cube flip to side 4
This trigger fires when the cube flip to side 4
Cube flip to side 5
This trigger fires when the cube flip to side 5
Cube flip to side 6
This trigger fires when the cube flip to side 6
Zone detection
This trigger fires when an event is detected in the zone
Presence is detected
This trigger fires when Presence detected.
Absence is detected
This trigger fires when absence detected.
Pet detected
This trigger fires when when the camera detects pet.
Package detected
This trigger fires when when the camera detects package.
Unknown vehicle detected
This trigger fires when when the camera detects unknown vehicle.
Human detected
This trigger fires when when the camera detects human.
Recognize the specified vehicle
This trigger fires when when the camera recognize the specified vehicle.
The door is closed
this trigger fires when the door, gate, window is closed
The door is opened
this trigger fires when the door, gate, window is opened
Queries (With)
-
History of water measurement
This query returns a list of every time a new water measurement of a swimming pool was available.
-
Current temperature
This query returns the current temperature.
-
History of salinity becomes too high
This query returns a list of when the salinity of your pool water was been evaluated as too high according to your swimming pool target values.
-
Current humidity
This query returns current humidity.
-
History of ORP becomes too high
This query returns a list of when the ORP of your pool water was been evaluated as too high according to your swimming pool target values.
-
History of ORP OK evaluations
This query returns a list of times the ORP of your pool water was evaluated as OK according to your swimming pool target values.
-
History of when temperature became too high
This query returns a list of when the temperature of your pool water was been evaluated as too high according to your swimming pool target values.
-
History of pH becomes OK
This query returns a list of when the pH of your pool water was been evaluated as OK according to your swimming pool target values.
-
History of salinity becomes too low
This query returns a list of when the salinity of your pool water was been evaluated as too low according to your swimming pool target values.
-
History of recent "ORP is < setpoint" alerts
This query returns a list of recent alerts when the ORP of your swimming pool water was smaller than your swimming pool "ORP setpoint"
History of water measurement
This query returns a list of every time a new water measurement of a swimming pool was available.
Current temperature
This query returns the current temperature.
History of salinity becomes too high
This query returns a list of when the salinity of your pool water was been evaluated as too high according to your swimming pool target values.
Current humidity
This query returns current humidity.
History of ORP becomes too high
This query returns a list of when the ORP of your pool water was been evaluated as too high according to your swimming pool target values.
History of ORP OK evaluations
This query returns a list of times the ORP of your pool water was evaluated as OK according to your swimming pool target values.
History of when temperature became too high
This query returns a list of when the temperature of your pool water was been evaluated as too high according to your swimming pool target values.
History of pH becomes OK
This query returns a list of when the pH of your pool water was been evaluated as OK according to your swimming pool target values.
History of salinity becomes too low
This query returns a list of when the salinity of your pool water was been evaluated as too low according to your swimming pool target values.
History of recent "ORP is < setpoint" alerts
This query returns a list of recent alerts when the ORP of your swimming pool water was smaller than your swimming pool "ORP setpoint"
Actions (Then that)
-
Wake up / sleep camera
This action will wake up / sleep of the specified camera.
-
Close the curtain
This action will close the curtain of your choosing.
-
Enable / Disable sound detection
This action will enable / disable sound detection of the specified camera.
-
Open the curtain to the designated position
This action will open the curtain of your choosing to the designated position.
-
Turn on/off switch (for Single Rocker / Channel switch or module)
This action will turn on/off the single rocker switches or module of your choosing.
-
Disable sound detection
This action will disable sound detection of the specified camera.
-
Sleep camera
This action will sleep the specified camera.
-
Turns on/off plug
This action will turn on/off the plug of your choosing.
-
Wake up camera
This action will wake up the specified camera.
-
Open/close the curtain
This action will open/close the curtain of your choosing.
-
Open the curtain
This action will open the curtain of your choosing.
-
Stop the curtain
This action will stop the curtain of your choosing.
-
Enable / Disable motion detection
This action will enable / disable motion detection of the specified camera.
-
Turn on/off the hub light / bulb
This action will turn on/off the light of your choosing.
-
Turn on/off Wireless Relay Controller (for 2 Channels)
This action will turn on/off the wireless relay controller of your choosing.
-
Disable motion detection
This action will disable motion detection of the specified camera.
-
Enable sound detection
This action will enable sound detection of the specified camera.
-
Enable motion detection
This action will enable motion detection of the specified camera.
-
Feeding for once
This action will make feeder feed once
-
Set color
This action will set the color of the light
-
Turn on/off the lamp (for 2 Channels)
This action will Turn on/off the light of your choosing.
-
Run light scenario
This action will run the light scenario
-
Close the door
This action will close the door, gate, window of your choosing
-
Open the door
This action will open the door, gate, window of your choosing
Wake up / sleep camera
This action will wake up / sleep of the specified camera.
Close the curtain
This action will close the curtain of your choosing.
Enable / Disable sound detection
This action will enable / disable sound detection of the specified camera.
Open the curtain to the designated position
This action will open the curtain of your choosing to the designated position.
Turn on/off switch (for Single Rocker / Channel switch or module)
This action will turn on/off the single rocker switches or module of your choosing.
Disable sound detection
This action will disable sound detection of the specified camera.
Sleep camera
This action will sleep the specified camera.
Turns on/off plug
This action will turn on/off the plug of your choosing.
Wake up camera
This action will wake up the specified camera.
Open/close the curtain
This action will open/close the curtain of your choosing.
Open the curtain
This action will open the curtain of your choosing.
Stop the curtain
This action will stop the curtain of your choosing.
Enable / Disable motion detection
This action will enable / disable motion detection of the specified camera.
Turn on/off the hub light / bulb
This action will turn on/off the light of your choosing.
Turn on/off Wireless Relay Controller (for 2 Channels)
This action will turn on/off the wireless relay controller of your choosing.
Disable motion detection
This action will disable motion detection of the specified camera.
Enable sound detection
This action will enable sound detection of the specified camera.
Enable motion detection
This action will enable motion detection of the specified camera.
Feeding for once
This action will make feeder feed once
Set color
This action will set the color of the light
Turn on/off the lamp (for 2 Channels)
This action will Turn on/off the light of your choosing.
Run light scenario
This action will run the light scenario
Close the door
This action will close the door, gate, window of your choosing
Open the door
This action will open the door, gate, window of your choosing
IFTTT helps all your apps and devices work better together